Refrigeration Oil Separator

We manufacture, export and supply Refrigeration Oil Separator to our customers in Shaoxing, Zhejiang, China.

Product Introduction:
During the compressor operating, the outlet of compressor always has lots of refrigerant oil. In order to prevent compressor not loss too much refrigerants and prevent the oil flow to system with refrigerants to interfere condensera s heat function and evaporatora s cooling function, we need to install an oil separator between compressor and condenser to separate refrigerant oil and refrigerants. Then the oil will flow back to the compressor crankcase, the oil return device operated by the ball valve on the bottom of separator and uses high-low pressure theory. The oil separator can ensure the sufficiency of oil in compressor and let it reach best cooling performance.

Feature:
1. Reliable needle valve closing system
2. Steel oil return system with hermetic welded construction (1/4a or 3/8a SAE connectors)
3.Reduce the vibration and noise at the high pressure end of system.
4. Maximum working pressure: 3.5Mpa

Diameter of the steel body is 102MM.
ZRW-55824 1/2''
ZRW-55855, 5/8'',
ZRW-55876, 3/4''
ZRW-55877, 7/8''
ZRW-55888, 1''
ZRW-55889, 1-1/8''
ZRW-559011, 1-3/8''

Diameter of the steel body is 159MM.
ZRW-56909, 1-1/8''
ZRW-569011,1-3/8''
ZRW-569213,1-5/8''
ZRW-569417, 2-1/8''