Pressure Transmitters / Transducers

Following are the Main Technical Specifications of Pressure Transmitters / Transducers :-
Type: 0705, 0710, 0720
Output signal
0,5-4,5 V ratiometric (Type 0705)
0-10 V (3-wire) (Type 0710)
4-20 mA (2-wire) (Type 0720)
Supply voltage Ub
5 VDC +/- 10% max. 6,5 VDC (Type 0705)
12-32 VDC (Type 0710)
10-32 VDC (Type 0720)
Maximum load
>= 4,7 kIC (Type 0705 & 0710)
<= (Ub a 10 V)/ 20 mA (Type 0720)
Accuracy: +/- 0,5% FS at room temperature (0705, 0710, 0720)
Long term stability: +/- 0,1% FS p.a. (0705, 0710, 0720)
Repeatability: +/- 0,1% FS (0705, 0710, 0720)
Thermal error: +/- 0,001% FS / A C (0705, 0710, 0720)
Compensated temperature range:-40A C - +80A C (0705, 0710, 0720)
Temperature range ambient:-40A C - +100A C (0705, 0710, 0720)
Temperature range media:-40A C - +125A C (0705, 0710, 0720)
Mechanical life expectancy:10^7 cycles up to pnom
Overload factor po1:4x pnom, static (above 600 bar: p0=1,650 bar)
Burst pressure1:8x pnom, static (above 400 bar: burst pressure=2,000 bar)
Wetted part materials:Stainless steel 1,4305 / SAE Grade 303, titanium
Maximum pressure rise rate: < 5,0 bar / ms
Vibration resistance:20g / 4-200 Hz DIN EN 60068-2-6
Shock proof:Half-sine 500 m/sA ; 11 ms DIN EN 60068-2-29
IP protection class:IP67 at M 12x1, DIN 72585 (Bayonet) and cable connection
IP 65 at DIN EN 175301-803
EMC: EMV 89/336/EG, EN 61000-6-2, EN 61000-6-3
Maximum cable length:30 m