Polybond Sbr

Polybond SBR

Polybond SBR is basically styrene butadiene latex. It is designed for use in cement-latex compositions. It has good mechanical stability properties and a long-term non-foaming behavior. It also passes the freeze thaw cycle stability test. It gives very high resistance to the penetration of water into the cement admixture, which gives better aging. It highly reduces the water cement ratio thereby increasing the compressive strength of the mortar.

MORTAR WITH POLYBOND SBR

Application Procedure

• First wet down the surface thoroughly. For preparing bond coat, mix 1kg Polybond SBR with 0.5 to 1 kg cement to form a lump free consistency. This slurry can then be applied by brush on the surface.

• Within 10 minutes of application of bondcoat, the polymer mortar should be applied.

• Curing should be done for 2-3 days.

Uses

• In repair mortars/concretes
• All waterproofing mortars/ concretes
• Waterproof Coatings

Packing : 1,5,20,50 kgs

The information given is true to the best of our knowledge. They are offered in good faith but without guarantee as conditions and methods of use of all our products are beyond our control. Users are requested to determine the suitability of our material before adopting them on a commercial scale.