Polishing Barrel - 250 Kg Capacity, Durable Steel Construction, Polishes Rusty Nails To Mirror Finish

Polishing Barrel

We nails are produced by Wire Nail Making Machines. The nails are to be polished as well polished as a well finished products. The quality of the Nails products depends upon the wire used on the machine. Generally, the wire received from the supplier is found dull due to wire Drawing process and also sometimes gets rusted due to weather effects. The wire for process of cutting Nails is not bright and as a result, the Nails produced do not have brightness and shining. Such finishes are never acceptable to the buyer. Thus , the Nails do require polishing which results in an attractive finished products.

TIPS ON POLISHING NAILS.

Load the polishing barrel with wire nailsupto a level 3 to 4 inches above the half filled level. if nails are rusty , add half a litre of Kerosene before adding saw dust and run the Barrel for about 10 minutes with blind lid fixed. Add saw dust in the barrel upto 80% of the full level. Fix the blind lid and run the barrel for about 30 minutes. Stop the barrel and change the lid from blind the perforated. Run the barrel for about 40 minutes with perforated lid in order to remove the saw dust. This will result in bright and shiny nails.

If the mirror finish is required on the Nails, it is advisable to use SOFT LEATHER PIECES in second sequence of polishing instead of Saw Dust, 15 to 20 Kgs. of such LEATHER PIECES are required for our 250 kgs. Cap. Polishing Barrel. These LEATHER PIECES can be applied again and again for about 15 to 20 cycles till they become very oily