Orthopedic Casting Tape - Knitted Fiberglass Fabric, Water-activated Polyurethane Resin | Light Weight, Strong & Durable, Fracture Management

(ISO, CE, FDA Approved) The Fiberglass orthopedic Casting Tape is made of knitted fiberglass fabric and water-activated polyurethane resin. It uses environmental friendly materials, and mainly used for the external fixation of fracture and common orthopaedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Our Fiberglass Orthopedic Casting Tape has strength and it is easier to be cut than Polyester casting tape. Cast consists of knitted fiberglass fabric & is impregnated with a water-activated polyurethane resin. Application instruction: Apply 1-2 layers stockinet over the affected part and additional padding can be used Wear surgical gloves Before opening the bag, choose the proper size Immerse the cast in room temperature water (20-25OC) for 4-6 seconds and squeeze it 2-3 times. The warmer the water is, the shorter the setting time is Wrap the cast spirally, overlapping one-half or two-thirds width of the cast on the previous layer. Take care to maintain proper tension and avoid wrapping too tight. The strength can be determined by the number of layers wrapped. Just 3-4 layers should be wrapped on the non-weight-bearing position and 5-6 layers should be wrapped on the weight bearing position.