Natural Ventilated Centering Plate For Machining

Price of Construction

Area of Construction

1000 sqm

Price Per SQM

844 SQM

Total Amount

844000

Amount in Words

Eight Lac, Fourty Four Thousand Only

01

Size

SQUIRE METER

02

Shape

Aero Dynamic along all four sides with curvature shaped hockey pipes of 48mm OD GI Pipes with a view to reduce the impact of wind and consequent damage of Poly House Structure.

Gutter Orientation North South and may change according to wind direction.

03

Structure

Hot Dip Galvanized Tubular Structure of BIS Standards. Galvanization of the structural members.

a

Withstand to wind velocity

Structure should withstand to minimum wind velocity of 80.6 miles per/hr or 130 Km/hr or 36 Meter per second.

b

Sizes of the structural members

c

Columns

76 OD, 2mm thick

d

Purlin

48 mm OD, 2mm thick at ridge and 43 OD

f

Trusses

Bottom horizontal 60 OD, 2mm thick GI Pipe, top chords and truss members 48 OD/and 43mm OD 2mm thick.

Bracing 32mm OD/1.8 mm thick GI Pipe structural members to be fitted in plated nuts, bolts and washers without welding.

g

Clamps and But Bolts

Well Compatible GI Clamps, 2mm thickness.

04

Grid Size

8 x 4 m

Size can be less depending upon space availability but not more 8m x4m grid size.

05

Balcony and Corridor

2 meter wide, vertical/curved pipe 60 mm OD, 2mm thick GI Pipe with 32mm OD, 1.8 mm thick horizontal GI pipe as supporting pipe. Area covered by corridors should not be included while calculating the area under poly house.

06

Foundation

Insert 1200 mm depth, Pit Size 400mm & 600mm depth, Concrete 1:2:4

07

Gutter

Galvanized sheet, 500mm wide, 120 GSM.

Gutter Height

4m t 4.5m

Gutter Slope

1 to 1.5 %

Ridge Height/Centre Height

Minimum 5 to 6.5 meter.

08

Fasteners

Cold Galvanized well compatible M6 to M10 bolts & nuts, 50 to 150 mm long with plain washers as per requirement and with the best quality plating to have good anti-corrosiveness.

09

Poly Film

Technical Specifications of polythene as per Indian Standard (IS 15827:2009) 200 micron thickness.

Poly Film Properties

UV Stabilization

Diffusion/Clear (Light Transmission)

Optional Properties

UV Blocking/Antivirus

Sulphur Resistant

Thermic

Anti-Drip

Anti-Mist

Anti-Dust

Three Layer/Five Layer

Light Diffusion up to 75%

10

Shade Net/Thermal Net

30 to 50%, shade net/aluminate/thermal net as requirement, 100 GSM

11

Poly Fixing

C Type profile aluminium/stainless steel

12

Spring Insert

A Plastic coated GI wire spring of 2.2mm diameter, GI spring 2inch strip

13

Entrance

Aluminium Double door.

14

Civil Work

Wall on fan side will be 35 mm thick and 80 cm high and wall on pad side will be 23 cm thick & 100 cm high from ground level in cm 1:6 with required foundation.

15

Electrical Fittings

Conduit and wiring as required for connecting light, fan, motor and pumping to main electrical supplies, electrical appliances of Indian Standard.

B

Fogging System

In consist of four way anti leak foggier 28 lph flow rate and particle size 80-100 micron, 16mm lateral class-3, PVC pipe, valves, filter, pump, panel with volt meter, MCB, relay, temp and humidity sensor ect.