Multipurpose Uv/ir Machine W/ 2x

Multipurpose UV/IR Machine w/ 2X Can be used for UV/Aqu coating and Curing/Drying. 2 ft extn. to feed in screen coated sheets

General Specifications:-
1. Maximum width of sheet = 24a
2. Minimum width of sheet = 3a
3. Maximum length of sheet = indefinite (theoretically) 4. Minimum length of sheet = 250 mm (5")
5. Coating speed = maximum 40 m/min
6. Thickness of sheet
DPX model = minimum 150 gsm, maximum 450 gsm.
DPXTS model = minimum 90 gsm , maximum 450 gsm for UV coating only,
customer has to provide 1 HP compressor for this model.
7. Manual feeding of sheet / board
8. Coating gsm = controllable from 3.0 to 6.0 gsm
9. Can be used for coating and curing of UV Varnish, Aquous coating (minimum 180 gsm sheet) , and as a curing unit for screen coated UV varnish.
10. Power consumption = 8KW a (3 phase). Additional power for Compressor to be provided for DPXTS Model
11. UV lamp a 200 W/inch, US make, guaranteed for 1000 hours of normal use or One year, whichever is earlier. Hour meter installed.
12. IR lamp a 100 W/inch, 20a
13. 2 No. tank for 2 different varnishes. Also 2 nos. heavy duty Varnish
recirculation pumps .
14. SAFETY :- High temperature cut off and fire safety.
15. Electrical Low Voltage :- Different Input voltage tapping for lamp transformer.
16. Provision to change to texture roller a to give texture finish. Texture roller to be purchased at extra cost, specify design in advance. Advisable to purchase extra rubber roller in such a case a used