Microprocessor Based Conductivity/tds/salt/temperature Meter

Following are the Main Technical Specifications of Microprocessor based Conductivity/TDS/SALT/Temperature Meter :-
Function : Conductivity & Temperature/ TDS & Temperature/Salinity & Temperature Simultaneously
Display : 16 Characters x 2 Lines Alphanumeric LCD
Power Supply : 230 V A 10%, 50 Hz AC
CONDUCTIVITY-TDS-SALINITY MEASUREMENT
Range Cond. 0.00 uS/cm to 1000 mS Auto Ranging
TDS 0 ppm to 1000 ppt Auto Ranging
Salinity 0.0 ppt to 50 ppt
Resolution Cond 0.01 uS on the Lowest Range
TDS 0.1 ppm
Salinity 0.1 ppt
Accuracy : A 0.5% of Range A 1 Digit
TDS Factor : 0.50 (By Default) & Adjustable Manually
SALINITY Factor : 0.75 (By Default) & Adjustable Manually
Cell Constant Adjustment : Digital 0.05 to 2.000 By Default 1.000
Temperature Compensation : 0 to 70E C Auto with Temp. Probe /Manual with Keys
Temp. Coefficient Adjustment : 0.00% to 4.00% Adjustable (By Default 2.00%)
Mode of Calibration : Manual a By Value & By Measurement
Reference Temperature : 20oC / 25oC
Measuring Frequency : 100 Hz & 1 KHz Auto Selection
Sensor : Dip Type Platinum Conductivity Cell
TEMPERATURE MEASUREMENT
Range : -20E C to +200E C
Resolution : 0.1 E C
Accuracy : A 0.1% of Range A 1 Digit
Calibration : Two Point Manual
Sensor : Pt-100 Probe