White & Silver Machine Setting Service

We are best renowned exporter, manufacturer and supplier of Machine Setting Service in Ahmedabad, Gujarat, India

>> Loosen clamping strip nut, before adjusting the beater height. Tighten fully after putting few packing plates to align the beater bearing housing.
>> Beater height will be adjusted by increasing or by decreasing the no. of packing plates.
>> Loosen or tighten these bolts for setting the main rail. After setting, both the bolts should be fully tightened.
>> Loosen these nuts, before adjusting the main rail. Tighten fully after adjustment.
>> Side projection of main rail for adjustment.

Installation Guide
Install machine on foundation bolts. Check the machine level and tighten the foundation bolts. Apply grease / oil at required locations.

Start the machine and run it at no load condition for 2 hours. Thereafter, run the machine with roller shaft for another 6 hours. For first 3 days. run the machine 8 hours a day and after 3 days, machine can be operated up to 22 hours a day. There should be break a of 30 minutes after every 5 hours.

Size of the leather washer for roller shaft should be 7-1/4" dia. duly well pressed and turned by using centres on both the sides.

>> Distance between two grooves in chrome leather roller should not be more then
>> The depth of the groove should be mm
>> In case feather roller becomes smooth, apply rough file on the rollers.
>> Before feeding the cotton, groove the rolls.