Lathe Machine Dro System - 1-3 Axes, 7-bit Display, 80-260vac, Ttl Input, 0.1-10î¼m Resolution, Radius Compensation, Hole Calculation, Center Determination

Lathe machine DRO system

D60-2V Full-featured digital readout (milling machine, boring machine, lathe machine, grinding machine)
D60-3V Full-featured digital readout (milling machine, boring machine, lathe machine, grinding machine, electronic spark machine)
D60-2M/3M milling machine and boring machine DRO
D60-3E electronic spark DRO
D501-1V single-axis DRO

D60 technical parameter
1)Voltage range: AC 80V-260V/50Hz-60Hz
2)Power dissipation: 20VA
3)Coordinate number: 1/2/3
4)Display: 7 bit display with signed
5)Times frequency: 4X
6)Readout box input signal: TTL, ELA-422-A
7)Input frequency: >100kHz
8)Resolution: 10um, 5um, 1um, 0.5um, 0.1um
9)Operating keyboard: Light touch buttons
10)Linear scale Grating space: 0.04mm, 0.02mm, 0.01mm, power supply is +5V. The difference between two and four TTL output signal is 90A .

D60 Function introduction
1)Circular drilling function: Digital readout can automatically calculate the location of the hole according to the inputted data
2)Linear drilling function: Opposite to the axis of any angle, only the hole spacing remain fixed value, The DRO can calculate the location of the hole according to the inputted data
3)Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value. Once the tool number is inputted, the DRO value will be saved.
4)Determine the workpiece center Only through the tool or touch