High Density Polyethylene (Hdpe) - Density 0.950 G/cm³, Melt Flow Rate 0.62 G/10min | High Elongation At Break 700%, Superior Tensile Strength 420 Kg/cm², Versatile Molding Applications

We are offering our customers a wide range of High Density Polyethylene (HDPE), which are available following Specifications :-
Density g /c m A : 0.950
Melt Mass-Flow Rate(MFR) g /10min : 0.62
Elongation st Break % min : 700
Tensile Stress at Yield kg/ cm2 : 240
Tensile Stress at Break kg/ cm2 : 420
Tensile Strain at Break % : 450
Flexural Modulus kg/ cm2 : 8500
Durometer Hardness(D Scale, Compression Molded) : 63
Shore Hardness(Shore D, Compression Molded) : 63
Brittle Temperature(Procedure A) : -76.0
Brittleness temperature : -76.0
Vicat Softening Point : 253
Vicat Softening Temperature : 253
Peak Crystallization Temperature : 268
Packing 25kg /polypropylene woven
HDPE is suitable for many plastic molding methods. Blow molding
can be used for making various types of bottles, cans and
industrial tanks and barrels. Injection molding is used for making
various containers and goods of daily use, such as basins, barrels
and baskets and furniture. Extrusion molding is used for making
pipes, strapping tapes, fibers and single filaments and can also be
used for making wires & cables covering materials and synthetic
paper. After a large amount of inorganic filler is added, HDPE can
also be used as an alternative to timber and cardboards for making
calcium plastic packing containers, furniture, doors and windows.