Gsm-based Water Level Controller - 210x210x80mm, 5 Amp Capacity | Magnetic Level Sensing, Remote Pump Control, Sms Notifications, Power Outage Alerts, Ip67 Protection

GSM Based Water Level Controller consists of two components, both with a GSM module each. At the Tank end is a Magnetic Level sensing Probe Unit and at the Pump end, a controller that receives the messages from the tank and based on High or Low level switches the pump ON/OFF as designed.

The three main components are easily discernible

How the system will work

1. As the level in tank goes to Low, the control unit will send signal to the pump room to start the pump.
2. The control unit at the pump room will switch the pump starter ON
3. The Control unit at the Pump room will also send a message to the Attendant's mobile as Pump No ... switched on
4. As the level in tank goes to HIGH, SMS from B will go to A to switch the pump OFF
5. The Controller at A will switch the Pump OFF, and will also send a message to C, that Pump No .... switched OFF.
6. C (The attendant) can at any time use his mobile phone to switch the pump ON or OFF. He will always get the message when Pumpis switched ON or OFF
7. In case of a Power Outage at Pump room, the attendant will get a message whenever the Power is out and when restored.

All components for A and B will be part of our supply except the SIM which will be under the user's arrangement.