1. We would give supporting angles throughout the container with

wooden reepers to hold the thermocol. The total container would be

embedded with thermocol for hot and cold protection. Finally a size of

6 mm thickness MDF plywood would give good finish to the interior walls.

2. The container would hold 4 in nos. windows of size 3' x 2' Al/glass

sliding type. These 4 windows would also consist safety grills and the outer would carry 4 metal shutters.

3. In the beginning of the left side of the container a Main Door of size

7' x 3' of Al/glass would be provided. A metal safety door would also be provided.

4. At both ends provision would be given for fixing of 1.5 T A/c with electrical points.

5. The ceiling would hold 4 in nos. concealed Tube Lights (twin type) and switches for

operating the same would be at the entrance.

6. Plug Points would be provided at bottom of each window - total 4 nos.(for computer)

7. Wall mounted plug points would also be provided at the top - 4 in nos.

8. The flooring would be of vinyl.

.

9. The exterior would be painted with your company logo .

Additional Work

1. They would be Provided 8'x8' Parition with 7x3' Aluminum Door in a manager room.

2. They would be provided the Manager Table 5'x3' = 1 no

The total cost in executing the same would be Rs. 1,95,000/-

(Rupees One lac Ninty five thousand only)

Hope the above is to your satisfaction and look forward in receiving your favorable order.

: Quotation for modification of 40' container into Office Container.

Plane Interior

------------------

With reference to the above cited subject we are pleased to offer of ourselves in

executing the above said job for your esteemed organization. We have a vast

experience in this field and have catered to many. We detail below the work to

be carried out for your reference and favorable order

1. We would give supporting angles throughout the container with

wooden reepers to hold the thermocol. The total container would be

embedded with thermocol for hot and cold protection. Finally a size of

6 mm thickness MDF plywood would give good finish to the interior walls.

2. The container would hold 4 in nos. windows of size 3' x 2' Al/glass

sliding type. These 4 windows would also consist safety grills and the outer

would carry 4 metal shutters.

3. In the beginning of the left side of the container a Main Door of size 7' x 3' of

Al/glass would be provided. A metal safety door would also be provided.

4. At both ends provision would be given for fixing of 1.5 T A/c with electrical points.

5. The ceiling would hold 4 in nos. concealed Tube Lights (twin type) and switches for

operating the same would be at the entrance.

6. Plug Points would be provided at bottom of each window - total 4 nos.(for computer)

7. Wall mounted plug points would also be provided at the top - 4 in nos.

8. The flooring would be of vinyl.

.

9. The exterior would be painted with your company logo .

The total cost in executing the same would be Rs. 1,85,000/-

(Rupees One lac Eighty Five Thousand only)

P.N. The Terms & Conditions and anything extra to be added can be done by you.