Foam Based Fire Extinguishers By Safex Fire Services Ltd.

We
are the foremost manufacturer, exporter and supplier of quality
approved range of Foam Based Fire Extinguishers that
are manufactured by our experts
utilizing premium grade raw material and latest technology in
adherence with the global standards. These extinguishers forms
a thick blanket of foam over the burning surface thereby cutting off
the oxygen supply and smothering the fire.
We offer this Foam
Based Fire Extinguishers
to the clients at industry leading rates.
Features:
Robust
constructionHigh
strengthExcellent
operationalLonger
service life
General Information TWIN5050 is mobile foam and powder fire extinguisher with nitrogen propellant cylinder. This fire extinguisher by the company SAFEX FIRE SERVICES LTD. that is in operation since 1972 and is ISO 9001 certified. The qualitative standards fixed are achieved through a careful selection and rating of the suppliers and through continuous and strict quality controls of all the components in compliance with the ISO 2859-1 standard. Trolley The trolley structure is made of steel sections, with rubber wheels of 300mm diameter. The foam nitrogen cylinder and the accessories are fixed by saddles on a sturdy hand-pulled trolley: the arrangement of the individual equipments has been designed for maximum ease of handling. Extinguisher Unit The foam cylinder is made of Mild Steel, while the one containing the powder is made of mild steel, both tested at 35kgf/cm2. A large-diameter threaded ring nut is welded at the top of the cylinders for easy charging and internal inspection during periodic testing. To the ring nut is screwed a forged brass cap with built-in safety valve of the type with calibrated spring made of stainless steel so as to guarantee calibration in time and even in the worst atmospheric conditions. In the rear part of the trolley is fixed the pressurization of the powder and foam cylinders. The discharge of nitrogen for the pressurization is controlled by an intermediate pressure reducer calibrated at 12 bars so as to obtain a uniform discharge at constant pressure. Two on-off valves placed between the reducer and the cylinders can allow independent pressurization of the two cylinders. The cylinders are pressurized for around 15 seconds, after which the spray guns can be used for discharging the powder and the foam. The discharge is controlled by means of two spray nozzles made of light alloy/plastic with ergonomically designed handgrip for an easy and rapid grip. the spray nozzles are fed by two plastic hoses. Each of 19mm diameter and 5m long. and offer maximum agility and ease of handling to the operator. The unit is charged with ABC 50% powder, compatible with the AFFF6% film-forming foam. Use This mobile fire extinguisher is used in large fires of any class A,B or C type, of vertically stored goods and of inflammable liquids that can spread on the surface. Normally it is used by first discharging the foam to knock down the high flames and then if necessary using the powder, compatible with the foam, to immediately put out already reduced flames. Maintenance To keep the fire extinguisher in perfect working condition, we recommended its maintenance according to the IS : 2190 standard. use of non-regional spare parts and refills shall entail the lapse of the fire extinguisher approval. Technical Data Trade Name SAFEX TWIN5050 Extinguishing classes A B4/ A B1C Charge 50 Ltr. foam AFFF 6% / 50 Kgs ABC powder Working pressure 15 kgf/cm2 Max Safety Valve 20kgf / cm2 + /-0,2 Cap 75mm Utilization temperature +5+60CA A A a A AcAca A A A A A Aca A A a A A Discharge time 30sec. powder / 30sec. foam Hose 19mmx5m Range 10-12m Cylinder Bottom: drawing-body: Rolling and Welding Steel Mild Steel IS: 1079 thickness 3mm Test pressure 35kgf / cm2 Anti corrosive treatment Phosphating Inside and Outside Epoxy powder Coating Propellant Nitrogen 6.8 Ltr. - 200 bar Dimensions (hxixw) 1020X1060X850 Total Weight 250 kgs.