Fiber Optical Splice Closure

We are offering our customers a wide range of Fiber Optical Splice Closure, which are available following Specifications :-
1.Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
2.External dimensions: 580mm*190mm*140mm i Horizontal typei
3.Weight: 4.5kgi Horizontal typei
4.Structure: open structure
5.Material: ABS/PC
6.Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring
7.Environmental temperature: -40a to +85a
8.Atmospheric pressure: 70a 106KPa
9.Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector wona t attenuate during the FOSC installation operation period.
10.Seal Performance: After the closures are sealed, then pressurized up to 100KPaA 5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
11.Re-encapsulation Performance: The closures are pressurized up to 100KPaA 5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
12.Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
13.Insulation resistance: a Y2X104MIC
14.Maximum capacity: 96cores
15.Span-life: 30 years.
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network