Fiber Microscope - 400x, 200x, 80x Magnification | Power Control, Contrast Adjustment, Video Compatibility, V-hold & H-hold Features

Following are the Main Features of Fiber Microscope :-
1. POWER switch / indicator
When The Fiber Microscope power switch is turned on, the indicator lights; When power switch is turned off, the indicator goes off.
2. CONTRAST Control
Provides the proper contrast between the black and white portions of picture.
3. BRIGHTNESS Control
Determines the brightness of the picture and is adjusted in conjunction with the CONTRAST Control.
4. V-HOLD Control
When the picture roles up and down on the screen, adjust the V-HOLD Control until there is a single steady picture.
5. H-HOLD Control
When the picture has slanting horizontal bars, rotate the H-HOLD Control in either direction until a stationary picture is obtained.
6. VIDEO IN Connector
Connect to the video out of a camera or another monitor (For multiple connection), or a VCR
7. VIDEO OUT Connector
Connect the video input of another monitor or a VCR.
8. IMPEDANCE Switch
Set the 75 OHM position when only one monitor is used, or is used in the last one monitor of multiple connection. The other monitors should be set to HIGH position when connected to the VIDEO OUT connector.
9. Power source input: AC 200V/240V
10. The head- face detector including one magnifier and one monitor.
400x, 200x, and 80x can be selected by this fiber microscope. Equipment with 2.5mm and 1.25mm adapter, MTRJ, and MT can be optional. Simple, economical and practical. Video display, clear image.