Fevicol Sp-5

Our provided Fevicol SP-5 is a synthetic rubber (polychloroprene) based solvent borne contact adhesive. The adhesive dries to a tough flexible film with good resistance to heat and ageing. It demonstrates fast initial strength and good contact capability. When used as two-way adhesive the open-time for assembly.

Features:-
Benzene free - hence not harmful to health.
High heat resistance, as per SICA method.
Suitable for multiple applications.

Uses:-
Fevicol SP-5 is suitable for spray application. It is a multipurpose adhesive and suitable for the automotive industry as a high performance trim adhesive. It forms a strong permanent contact bond between the following materials : Painted steel, Plywood, Chipboard, Polyurethane foam, Muslin.

How to Apply:-
The surfaces to be bonded should be clean, dry and free from oil/ grease/ dirt.Trichloroethylene/ Acetone may be used for cleaning.
Stir the contents of the container before use.
Apply uniform coat of adhesive on both the substrates to be bonded, using an air supported spray gun with 1.6 - 2.0 mm nozzle orifice from a distance of 2-3 feet at 3.5 - 5.0 kg/sq. cm. air pressure.
Allow air to dry for a minimum of 5 minutes. Bring both the substrates together with perfect alignment and press firmly. Sufficient pressure is mandatory to obtain satisfactory coalescence of the two adhesive films. The contact bond offers sufficient initial strength for immediate handling. The bonded assembly need not be kept under pressure.