Fan Coil Unit - Superior Quality Steel, Capacities 400-1000 Cfm | Long Life, Noise Reduction Motors, Efficient Heating And Cooling

huba 402 series - differential pressure transmitter

Differential Pressure Transmitter
Type - 402
Manufacturer - HUBA CONTROL
Model - 402.9510021
RANGE - 0-50 MBAR
OUT - 0.5....4.5 V
IN - 12 ( 10.2.... 33 ) V

Product information

The Differential Pressure Transmitters of Type 402 Are Ideal For Detecting Small Air Flows in HVAC Systems And For Measuring Low Pressures In The Environmental And Medical Sectors. Sensors Specifically Developed For Each Pressure Range Enable Physically Accurate And Long-Term Stable Measurements. They Allow For Simple And Quick Installation, Either Directly Onto a Mounting Plate Or Onto a PCB

Attractive Price-Performance Ratio
Excellent Synergy Of Membrane Technology And Ceramic Elements
Special Adapter For DIN Rail Mounting
Direct PCB Mounting With Simple Snap System

Technical Data

Product Feature

Pressure Measuring Range : 0 ... 50 mbar (Relative and Difference)
Response Time : <10 ms
Load Change : <10 Hz
Sensor Weight : 28 g

Field Of Application

Media: Air Neutral Gases
Medium Temperature: 0 ...70 A C Non-Freezing Media
Permissible Overload On One Side: 100 Mbar
Bursting Pressure At Room Temperature: 200 Mbar
Bursting Pressure at 70A C: 150 Mbar

Ambient Condition

Ambient Temperature: 0 ...70 A C
Storage Temperature: -30 ...70 A C

Material

Housing With Media Contact: Polycarbonate PC; Polyamide PA
Membrane With Media Contact: Silicone
Measuring Element With Media Contact: Ceramic Al2O3 (96 %)

Electrical Data
Output Pressure: 0,5 ...4,5 V
Supply Voltage: 10,2 ...33 VDC
Permissible Load: >15 kOhm (Against GND)
Current Consumption: <8 mA
Inverse-Polarity Protection: Mechanically Guaranteed
IP Protection Class: IP 00
Electrical Connection : Printed Circuit Board Assembly Solderable Pins On The Print Side Printed circuit board assembly Mounted And Soldered On Adapter RAST 2.5 Connector
Approval
EMC Compatibility:The Product Is Intended Exclusively For Installation In Appliances That Fulfil The Requirements Of The EC Directives. CE Certification Is The Responsibility Of The Customer
Installation Guide
Installation Orientation: Pressure Connections Downwards Pressure Connection P1 Top
Assembly:Snap-On Mounting On Printed Circuit Board Max 1.6 MM Thickness Adapter Screw Mounting With Bracket
Applications
VAB SYSTEMS
ERV
MOBILE HYDRAULIC
INDUSTRIAL AUTOMATION

Accessories
RAST 2.5 Connector:With Cable 110 CM 3-Pole
Fastening Screw:For Wall Thickness 1-2 MM Screw Length 6 MM Min 2 Screws Required
Calibration Certificate
Mounting Bracket
Mounting Plate Complete For Mounting Rail TS 35
Fastening Screw : For Wall Thickness 4.1-6 MM; Screw Length 10 MM Min. 2 Screws Required