Electric Wire Tapping Machine - Stainless Steel, 630mm/1250mm/1250-1600mm Size Ranges | High Speed, Automatic Operation, Low Energy Consumption, Precise Measurement Accuracy, Electric Drive

These are the technical parameters for a wire tapping machine:

Model: There are three models with different wire ranges and widths: 630mm, 1250mm, and 1250-1600mm
Applicable wire range: The wire range varies for each model, with the smallest being 0.5-6mm2, the medium being 10-70mm2, and the largest being 10-240mm2.
Traversing tension: This feature is automatic.
Main motor speed: The speed varies for each model, with the highest being 0-600 r/min for the 630mm model and 0-300 r/min for the other two models.
Loading bobbin type: The loading bobbin type varies for each model, with the smallest using a lever-type, and the other two using electric types.
Pay-off bobbin model: The size and width of the pay-off bobbin varies for each model, with the smallest being 400-630mm and width of 30-100mm, the medium being 800-1250mm and width of 60-150mm, and the largest being 1000-1600mm and width of 150-200mm.
Tapping model: The machine is designed for tapping wires with an outside diameter less than 320mm and an inner diameter of 120mm.
Power: The power of the machine varies for each model, with the smallest being 2.2kw, the medium being 3kw, and the largest being 4kw.
Meter counter structure: The meter counter structure varies for each model, with the smallest using a type of wheel pressure, and the other two using double wheel types with air pressure.
Induction type/Measurement accuracy: The measurement accuracy is 0.5% and uses a rotary encoder.