Dr Fixit Torchshield Ap 3160

Our company is interested in the trading and supplying a marvelous quality of Dr Fixit Torchshield AP 3160 in Ghaziabad, Uttar Pradesh, India. One can avail this range from us at most competitive rates.

Product Details:
Minimum Order Quantity250 Box
Packaging Size20 KG
TypesCrystalline Waterproofing, Acrylic Based Polymer Coating, Bitumen Membrane, Waterproofing Coating, Cementitious Waterproofing
ApplicationConstruction, Cosmetics
Form of ChemicalsSolid, Liquid
Brand preferenceDr Fixit

Dr.Fixit Torchshield AP range of polymer modified membranes are modified bitumen waterproofing membranes manufactured by saturating and coating a polyester carrier with a waterproofing compound made of a special grade of modified bitumen with APP polymers. Whereas the modifiers boost the thermal, mechanical and ageing characteristics of the membrane compound, the non woven polyester carrier establishes the mechanical characteristics as it performs as the reinforcement element that provides the membrane with its significant Tensile Strength, Tear Strength, Puncture Resistance and Elongation properties.The upper and lower surfaces are laminated with polyethylene film.

Dr. Fixit Torchshield AP membranes are ideal for use in a wide range of waterproofing applications such as foundations, basements, tunnels, roofs, car park decks and other civil works. The chemical resistance of Dr. Fixit

Torchshield AP makes it particularly suitable for tanking applications in areas where aggressive ground water
conditions prevail.

Areas of Application

Waterproofing and damp-proof membranes for:
Concrete roof (Sloped/Flat roofs)
Basements and swimming pools (Externally)
Car park and irrigation canals lining
Concrete retaining structures
Tunnels and subways



Features & Benefits
High strength reinforcement gives excellent resistance to puncture and stress. Dr. Fixit Torch shield AP is easily a torch on applied and adheres well to the substrate. The modified bitumen membranesi? coating adheres well to contours, and is dimensionally stable to normal structural movements in the building.
Method of Application
This application procedure is a standard guideline for using the 3 & 4 mm membranes only, which may slightly vary upon the site conditions & different application areas. For details, consult the Dr. Fixit Technical Team.

1 SURFACE PREPARATION

Clean & remove dust, dirt, loose particles and unsound substrate. Make the surface smooth, even & free from local depressions with polymer-modified morthar. Priming can be done over this the next day.

2 PRIMING
Apply one coat of a bitumen based primer Dr. Fixit Bitushield Primer SB on cleaned & leveled surface @ 3-5 sq.
m./ litre / coat.

3 APPLICATION
Unroll the Dr. Fixit Torchshield Roll after application of primer.
Align the roll correctly & re-roll it in alignment before torching.
Use gas burner to heat substrate & underside to softening points. When the embossing disappears, roll forward & press firmly against substrate to bond from the lower end towards the higher end.
Keep overlap margin for minimum 100 mm.
Ensure that a constant flow of bitumen is maintained across the whole width of the Roll and that a bead of bitumen is extruded from each edge which demonstrates that a good seal has obtained. DO NOT flatten the bead with trowel.
All angles & abutments upstands should be sealed with extra care to ensure perfect bondage. Seal the edges well into grooves & protect to seal with a polysulphide / polyurethane or a bitumastic sealant.
Dr. Fixit Torchshield applied all over the terrace, must be finished with a coating of aluminum paint for non-foot traffic area. For foot trafficked area, overlay with concrete screed morthar