Dr.fixit Lw 101

Dr. Fixit Short Specification (Typical)

Product Type:
Construction chemical waterproofing systems (liquid, cementitious, acrylic, PU, and bituminous coatings)

Manufacturer:
Pidilite Industries (Dr. Fixit brand)

1. Integral Waterproofing Admixture
Added to cement concrete/mortar during mixing
Improves workability and water resistance
Reduces permeability and shrinkage cracks
Typical use: foundations, slabs, plaster
Example: Dr. Fixit Pidiproof LW+
2. Cementitious Waterproof Coatings
Two-component polymer + cement systems
Applied by brush/trowel on concrete surfaces
Forms flexible waterproof membrane
Used for: toilets, terraces, water tanks, basements
Crack bridging up to 2 mm (varies by product)
3. Elastomeric Roof / Exterior Coatings
Acrylic-based waterproof coatings
High UV resistance and weather durability
Bridges hairline cracks
Used for exterior walls & roofs
Forms seamless protective film
4. Sealants (PU / Silicone)
Single-component sealants
High elasticity (up to 500% elongation in some types)
Used for joints, glazing, expansion joints
Resistant to temperature and UV exposure
5. Cracks & Repair Systems
Acrylic / cement-based crack fillers
Shrink-free, paintable, fast drying
Used for plaster cracks & surface repair
High adhesion to cementitious surfaces
General Performance Features (Common to Dr. Fixit range)
Waterproof / water-repellent barrier
Good adhesion to concrete & masonry
Crack-bridging flexibility
UV & weather resistance (for exterior products)
Low VOC / non-toxic formulations (most products)
Easy application (brush/roller/spray depending on system)
Typical Short Spec Line (Tender Format Example)

"Providing and applying Dr. Fixit waterproofing system as per manufacturer specification including surface preparation, application of primer/coating/sealant as required to form a durable, seamless, elastomeric waterproof membrane.