Manual Door Closer - Adjustable Hydraulic Speed Control | Enhanced Compression Spring, Three-stage Action, Delayed Closing Feature

A manual Door Closer stores the energy used in the opening of the door in a compression or torsion spring and releases it to close the door. Some closers allow for adjustment of the strength of the spring, making it easier or more difficult to push the door open. To limit the speed at which the door closes, most door closers use hydraulic (oil-filled) dampers, although spring mechanisms may also be used for damping. The speed at which the door closer closes the door may be adjustable by up to three adjustment valves. These valves often adjust the sweep speed and the latch speed of the door and some closers are optioned with a delayed action valve. The latch speed is the speed that the door travels in the last third to 10 degrees as it closes and is often set fast so that the door can properly latch closed. The sweep speed is the speed which the door travels at along the first two thirds of its travel and is often set slower than the latch speed. For openings where a much longer close time is desired, you may opt for a delayed action closer. The delayed action valve slows the sweep speed dramatically for roughly the first half of the sweep range. Door closers which provide this two or three-stage action and close doors at a determined rate are called 'controlled' door closers.