Digital Wafer Type Intelligent Vortex Flow Meter

Our Digital Wafer Type Intelligent Vortex Flow Meter is made from high quality material. The series of Vortex Flow meter is based on Carmen Vortex Principle, which adopts piezoelectric crystal as testing components. It is a new kind of stress detecting vortex flow meter. It has the advantages of wide range rate, high accuracy, low pressure loss, good medium generality, pulse signal output proportional to flow, convenient to connect with computer etc. The detector probe of sensor and the vortex generating body are installed separately, and the high temperature resistant piezoelectric crystal doesn't contact with medium, so the instrument is simple structure, good generality, and high stability.
The Vortex Flow meter sensor can be used to detect and measure the flow of all kinds of gas, fluid and steam.

Technical Parameters:
Measured medium: All kinds of gas, fluid and steam
Nominal diameter: 15-500mm (Integrated-type) 300-2200mm (Insertion type)

Operating environment:
Environment temperature: -20A C-60A C
Liquid temperature: -40A C -250A C (Max 350A C)
Relative humidity: 5%~90%
Nominal Pressure: 1.6Mpa 2.5Mpa 4.0Mpa
Measurement Range: Gas and steam: (5-70)m/s fluid: (0.5-7) m/s
Measurement Accuracy: A 1% A 1.5%
Output Signal: (4-20mA)+Pulse
Safety Protection: IP6
Power Supply: DC24V