Control Cables - Annealed Bare Electrolytic Copper, 1.5 & 2.5 Sq. Mm, Up To 61 Cores | Pvc Insulation, Oil & Chemical Resistant, Suitable For High Temperature Applications

Control Cables different from Power Cables in their application, they are used to carry control signal of low power strength, but can be subjected to different working temperature conditions like heaters, boilers and can be exposed to oil, chemicals and other solvents.

Detail of our Control Cables:
* VOLTAGE :- These cables can be used on AC Voltage up to & including 1100 V or DC up to & including 1500 V.
* Size :- 1.5 Sq. mm. & 2.5 Sq. mm. up to 61 Cores in Control Cable.
* CONDUCTOR :- Annealed Bare Electrolytic Copper / Aluminum Conductor conforming to IS:8130:1984.
* INSULATION :- Conductor are insulated with PVC Compound as per IS:5831:1984.
* COLOUR OF CORES :- Cores are identified with a color scheme as per IS:1554(Pt-I):1988 as under
1 Cores - Red & Black
2 Cores - Red, Yellow & Blue.
3 A & 4 Core - Red, Yellow, Blue & Black. (Reduced Neutral Core in case of 3 A Core)
In case of cable exceeding five cores, two adjacent (counting and direction cores) in each layer shall be colored Blue, Yellow & remaining cores gray/Cores can be identified by numbers by numbers printed on that of same color .
* LAYING Of CORES :-Cores are laid up with a suitable lay. The Final layer direction shall be kept right hand lay.
* INNER SHEATH :-The Inner Sheath is applied over laid up of cores by extrusion/wrapping of thermoplastic material.