Control Cables - Annealed Copper/aluminum, 1.5-2.5 Sq. Mm, Up To 61 Cores | Heat Resistant, Shock Proof, Minimum Distortion

Heat
resistance

Minimum
distortion

Excellent
tolerance

Shock proof

Control cables can be used on AC Voltage up to & including 1100 V or DC up to & including 1500 V.

1.5 Sq. mm. & 2.5 Sq. mm. up to 61 Cores in Control Cable.

Annealed Bare Electrolytic Copper / Aluminum Conductor conforming to IS:8130:1984..

Conductor are insulated with PVC Compound as per IS:5831:1984.

Cores are laid up with a suitable lay. The Final layer direction shall be kept right hand lay.

The Inner Sheath is applied over laid up of cores by extrusion/wrapping of thermoplastic material.

It is applied over inner Sheath. It may consist of galvanized Round Steel wires or galvanized Flat Steel Strips conforming to IS:3975. Round Wire armoring is provided , where the calculated diameter under Armour is 13.0 mm. Above this, armoring is either round wire/steel strip.

A final covering of PVC Compound, conforming to IS:5831:84, is applied over Armoring in case of Armored Cable or over Inner Sheath in case of Unarmored Cable, called as "Outer Sheath". The Insulation, Inner Sheath & outer sheath can be HR PVC, FRLS PVC or FRHF Compound depending upon their application.

The Control Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations.