Contact Adhesive - High Viscosity 2200 Cps, Suitable For Bonding Leather & Pvc | Strong, Permanent Bond For Diverse Materials

The materials to be bonded should be dry, clean and free of dust, grit, loose materials, oil or grease.

Using a brush or spreader, apply a thin even coating of adhesive to both of the surfaces.

Allow the solvent content to evaporate before bonding the materials. The time for this evaporation will depend on the temperature and humidity. On absorbent or permeable materials such as leather/chipboard, bonding may be possible within a matter of 2-3 minutes of application; on non-absorbent or non-permeable materials (eg. Formica/metal) a minimum of 15 minutes should elapse before the surfaces are bonded.

Join the materials under firm pressure.

Dried coatings of Stylam Excel may be reactivated by wiping over the surfaces with suitable solvent.

Helps in
removal of all materials that can be joined with each other or painted
metal, wood, chipboardm hardboard as well as unpainted metal. Moreover,
we offer our Contact Adhesive at affordable rate.

Properties - Stylam
Excel

Viscosity -30A A C (Brookfield/RVDV-E)2000 2200 cps

Density-30A A C 0.85 + 0.02 gm/ml

Flash Point
0 0C

Coverage- 3-5 square meters of bonded material per
litre

Minimum Open Joint time - 2-15 minutes
Depending upon absorbency of

Materials to be bonded

Maximum
Open Joint Time Cleaner 60 minutes

Pack
Sizes: 500 ml, 1 Litre, 5 Litre, 30 Litre