Condensate Pot - Carbon Steel Astm A 106 With Zinga Coating, 2 To 6 Inch Npt/welded Connections, Liquid Barrier For High Temperature Protection

The main purpose of condensate pot is to catch and hold condensate and foreign material. This prevents damage to the metering system and/or manifold. The condensate may be drained from the bottom valve connection. OS&Y gate or ball valves to be used as the drain port.

Condensate chambers are used as a barrier between the main line and the secondary instruments in the measurement of steam or other vapours which condense to a liquid state insuring compatibility with the secondary instruments. They can also be used to cool down very high temperature liquids. Seal pots are installed where the line fluid is corrosive or viscous to the extent where it cannot be permitted to contact the secondary instrument. (transmitter or gage) thereby acting as a liquid barrier between the line fluid and the condensate.
Seal pots/Condensate chambers are available in carbon steel to ASTM A 106 with Zinga coating Equivalent to hot dip galvanized, stainless steel to ASTM A 312 Piping code, P22 and other alloy steel fabricated from Seamless pipe with inside cleaned and checked to assure equal volume. Standard pipe sizes are 2" to 6". Connection fittings are NPT or welded socket adaptors. The half coupling pipe connections are jig welded inside and out at 90 degrees to assure safety, provide proper alignment and ease the task of installing.