Compatible Card Reader

Specifications:

Dimensions: 80A 80A 20mm

Power requirement: 12 V DC at 100mA

A linear regulator is recommended

Support card: all 125kHz HID proximity card, such as HID prox II, HID fob card and more

Interface: wiegand 26/34

Reader range: 5 to 10cm

Frequency: 122 to 128kHz

Operating temperature:-30 to +60A C

Operating humidity: 5 to 95% RH (relative humidity non-condensing)

Audio/visual indication: green, red, and buzzer signal output

Response time: less than 0.2 seconds

Cable length: 250mm

Weight: 0.15KG

Wiring:

Red: power 12v

Black: power ground

Green: brigand output D0

White: brigand output D1

Brown: green LED control

Blue: buzzer control

Yellow: hold

LED/buzzer function description:

LED function: the LED color is normally in red

It starts with 2 green flashes on power up HID compatible card reader and remains red

When a HID proximity card is present to the reader

The LED will shortly flash green, this indicates that the proximity card was read properly by the reader

When the LED control signal is activated by access controller host, the LED changes to green

Beeper function: power up the HID compatible card reader, the beeper will activate 2 times when a HID proximity card is presented to the HID proximity card reader, a short beep will be emitted

This indicates that the HID, proximity card was read properly by the reader