Common Automatic Meter Reading System Additives: Nil

Common Automatic Meter Reading SystemNew Way Electronics, a pioneer in Hand Held Terminals and computers for electricity Meter reading and billing applications, explored further to provide single point multi Technology Automatic Meter Reading Solutions (GSM, GPRS,CDMA, PSTN, Low Power Radio modem technologies). GSM/GPRS based AMR system is the most compact, complete AMR hardware, ready to install in existing meter boxes.CompactEasy InstallationEnvironmentally protectedIntegrated optical portRemote control by AT commandsFeaturesOn line monitoring of vital Billing parameters (like energy, demand, MD), Tamper events, Power quality Load Control Power outage and Quality Power Management Energy auditing Energy accounting Data collection from different energy meters irrespective of make and model. Supports any of the communication technologies like; GSM / GPRS / CDMA / PSTN In built universal power supply (single phase or three phase) and also has built in Battery Can collect data from a meter communicating on a proprietary or open domain protocol (like IEC1107, DLMS etc..) Supports two way communication, facilitating for monitoring, control and administration. Tamper Management Facilities GPS time synchronization from Central server for effective energy audit. Type Tested for protection against Environment, EMI - EMC, Surge & AC Voltage etc. SpecificationsBuilt in ARM Processor. 4MB Non volatile Data memory. 1 Open collector output for external device control. 1 Input for tamper sensing. RTC with backup battery. Dual-band 900/1800 MHz E-GSM/GPRS Modem. Maximum Output Power: 2W for GSM 900 MHz. 1W for GSM 1800 MHz. Input Voltage: 85 to 300 V AC (110 / 230 V 30%). SIM Interface: 3V/5V. 3dBi gain screw or mag mount antenna with 1meter cable length (optional-variable cable length, 10dBi gain antenna). GSM Data Rate: 14.4 Kbps max (depends on service provider) GPRS Data Rate: 115 Kbps max Compact, light weight and easy to mount /install inbuilt 6 KV surge protected SMPS based Power Supply Integrated IEC 1107, Pact, ANSI compatible optical port for interfacing most of the reputed energy Meters. Average Data Storage Per Day: 10 K BytesDimensions: 130x78x32 mmStorage Temperature: -20oC to +70oC Operating Temperature: 0o to +55oCFeaturesOn line monitoring of vital Billing parameters (like energy, demand, MD), Tamper events, Power quality Load Control Power outage and Quality Power Management Energy auditing Energy accounting Data collection from different energy meters irrespective of make and model. Supports any of the communication technologies like; GSM / GPRS / CDMA / PSTN In built universal power supply (single phase or three phase) and also has built in Battery Can collect data from a meter communicating on a proprietary or open domain protocol (like IEC1107, DLMS etc..) Supports two way communication, facilitating for monitoring, control and administration. Tamper Management Facilities GPS time synchronization from Central server for effective energy audit. Type Tested for protection against Environment, EMI - EMC, Surge & AC Voltage etc.SpecificationsBuilt in ARM Processor. 4MB Non volatile Data memory. 1 Open collector output for external device control. 1 Input for tamper sensing. RTC with backup battery. Dual-band 900/1800 MHz E-GSM/GPRS Modem. Maximum Output Power: 2W for GSM 900 MHz. 1W for GSM 1800 MHz. Input voltage: 85 to 300 V AC (110/230 V 30%). SIM Interface: 3V/5V. 3dBi gain screw or mag mount antenna with 1meter cable length (optional-variable cable length, 10dBi gain antenna). GSM Data Rate: 14.4 Kbps max (depends on service provider) GPRS Data Rate: 115 Kbps max Compact, light weight and easy to mount /install inbuilt 6 KV surge protected SMPS based Power Supply Integrated IEC 1107, Pact, ANSI compatible optical port for interfacing most of the reputed energy Meters. Average Data Storage Per Day: 10 K BytesDimensions: 130x78x32 mmStorage Temperature: -20oC to +70oC Operating Temperature: 0o to +55oC