Belt Tear Switch - Cast Aluminum Enclosure, Ip65 Protection, Manual Reset | Includes Pair Of Monitoring Units, Dual Sensor Ropes With Rope Clamps And Hooks

We have emerged as the leading organization, involved in manufacturing and supplying of Belt Tear Switch in Pune, Maharashtra, India. These are manufactured by optimum grade material and latest technology under the knowledge of adroit professionals. This product is duly tested by the quality controllers on several stages before the delivery. Moreover, these could be acquired from us in various provisions at feasible rates.

The monitoring units are to be fixed in inclined position in the direction of the belt rnovement.

The unit is provided with two 5meter long rope lengths. Appropriate length to be cut while fixing the rope. The splinters, resulting from tearing of the belt, will push out the cross connected sensing rope to acuate the switch. The potential free contacts of the switch are to be wired into appropriate warning/tripping circuit. The switch can be reset by operating the reset lever. Rope to be rnanually refixed in position while re-starting the belt operation.

Monitoring Units

Enclosure : Cast Aluminum
Degree of Protection : IP65
Actuation : By splinters of the torn belt.
Reset : Manual
Contact Arrangement : 2 No + 2NC
Contact Rating : 10 Amp. Res. @ 110/240 V AC 50Hz

Construction

A set consists of Pair of monitoring units with mounting frame.
Pair of sensor ropes-each 5mtrs. long.
Rope clamps - 08 Nos.
Hooks 02 Nos.