Vapour Bag Filter - Durable Metal Housing, Efficient Dust Collection System | High-pressure Air Jet Cleaning, Easy Dust Disposal

The Vapour bag filter consists of filter bags enclosed in a metal housing. In operation, dust - laden air enters the collector housing through the hopper inlet in the storage - discharge hoppers. The fine particle travel upward and collect on the filter bags. The clean air passes through the bags and vented to the atmosphere. A high - pressure jet of compressed air directed through the bag at times intervals removes the dust, which is deposited in the hopper and is easily collected for disposal or recovered for use.

Anatomy Of Fabric Filter System

The dust-tight Bag Filter has three sections; a plenum at the top, a collector housing in the center, and a hopper at the bottom. A plenum (Q) houses the blowtubes and supports for the solenoid valves. Clean air or gas is discharged through the exhaust out let (R) in the plenum. The housing (M) contains the filter bag assemblies. Below the housing is the hopper (0) which contains the inlet (N). A diffuser (T) in the hopper, adjacent to the inlet absorbs the impact of the high velocity dust particles and properly distributes the incoming air. Pressure drop, which measure collector performance, is indicated by a DR Gauge (S) connected at one end to the filter bag section and to the clean air plenum at the other end. A Rotary Air Lock (P) valve is recommended as the discharge valve to handle the collected dust. We are looking queries from Gujarat only.