Automatic Multi Head Liquid Filling Machine

This is a volumetric principle-filling machine. This unit is fully automatic unit and can be coupled with an unscrambler to feed the bottles to the in feed conveyor of this machine. This machine achieves the complete operation of filling the bottles automatically and accurately. The complete filling sequence for different fill sizes is programmable for the speed with the movement of a switch, achieves complete synchronisation automatically.
The fill range of this machine can be adjusted from 30 ml to 1000 ml with the change of syringes. Higher fill volumes can be achieved by taking multiple strokes of the syringes. The number of filling head can be either 4,6 or 8 depending upon the output required from this unit. Usually we get an output of 80-160 bottles per minute. This also depends on the fill volume of the bottle & number of filling heads.

The filling machine is further attached to a manual capping machine (pedal type) which is to be operated by an operator who would carry the bottle from the filling section, place the cap on the bottles neck and seal it with the help of the rotating head. This operation is also done automatically by connecting an online automatic bottle capping machine.

The sealed bottles are then carried towards the inspection table by means of a slat conveyor, where the bottles are visually inspected by the operator for any particles in the filled liquid.