75cm Pu Warning Post

Following are the Main Technical Specifications of 75cm PU Warning Post :
1. Body material: PU;
2. Size: (450/750)*80mm
3. Thickness: From 2mm on upper side to 5mm in the bottom
4. Ultimate tensile strength: 50MPa.
5. Colors: orange post with yellow or white reflective sheeting.
6. Reflective sheeting: crystal lattice high intensity grade.
7. Theoretical rebound time: 100 thousand times
8. Ultimate tensile strength: 50MPa
9. Elongation at break: 450%
10. Compression deflection: 13%
11. Abrasion resistance: 22mm3
12. Tear resistance: 88Kn/m
13. Temperature resistant: -60A C ~+80A C

Usage Areas:
a c Center Lane Dividing for narrow roads
a c Multi lanes for broad roads
a c Sharp Curves
a c Traffic Islands
a c At the start of central verge (where single road becomes double road)
a c No Stop Zone at T Shape road traffic signals
a c Parking lots
a c Construction Zones
a c No Entry Zone
a c Dangerous medians and 'U' Turn etc.
Usage Installation Procedure:
Clean the area where spring post is to be installed. Mark the nail points, grout the holes and clean the surface again. Pour some good quality of epoxy then place the spring post and fix the bolts with hammer.