Building Materials In Palej

ColorOrange

MaterialSteel

Load Capacity500kg

Lifting Height10m

Base Dimensions1.5m x 1.5m

Power SourceElectric

Product typeInsulation material

ApplicationBuilding insulation

MaterialFiberglass

ColorLight yellow

ShapeCylindrical

Diameter2 inches

MaterialCold Rolled Steel

ProfileCorrugated

Surface FinishGalvanized

PaintHigh Grade Metallic

DimensionsVariable

InstallationEasy

MOQ100 Piece/Pieces

Product TypeElectrical Wire

MaterialCopper

FunctionElectric Connection

UsageHome and Industry

Insulation MaterialPVC Rubber

Conductor MaterialPVC Rubber

MOQ200 Unit/Units

Product TypeBuilding Construction Material

Main MaterialMixture of aggregates

Weight100 Kilograms (kg)

UsageConstruction

MOQ20 Container/Containers

ApplicationASCOSHIELD PU+ is pre-mixed and ready to use. ASCOSHIELD PU+ may be applied by brush or paint roller. Prior to applying to general surface area pre-treat all cracks joints corners and coves first by applying a generous coat of ASCOSHIELD PU+ approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOSHIELD PU+ to same area again allowing to dry. Once pre-treated areas are dry apply a generous coat of ASCOSHIELD PU+ to entire surface included pre-treated cracks joints and coves and allow to dry. DO NOT skimp on initial coat of ASCOSHIELD PU+. Allow to dry to the touch before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and if required reapply on required areas and allow it to dry.

Product TypePU Modified Liquid Applied Membrane

Surface TreatmentBlocks Brick Concrete Renders etc.

Feature1) Excellent adhesion & highly elastic 2) UV resistant 3) Anti-root properties 4) Excellent crack-bridging 5) Excellent waterproofing 6) Easy & economical application

MaterialAAC

DimensionsVariable

Density400-600 kg/m³

Compressive Strength3-8 MPa

Thermal Conductivity0.1-0.2 W/mK

Sound AbsorptionHigh

MaterialConcrete

DimensionsVariable

WeightVariable

Compressive Strength20 MPa

Water Absorption<5%

UsageWall construction load-bearing applications

MaterialStainless steel

Capacity500 liters

Power5 kW

Dimensions1500x1000x1200 mm

Weight500 kg

MotorThree-phase

MOQ500 Piece/Pieces

TypePlastic Mug

MaterialPlastic

ColorOrange Red

Cavity QuantitySingle Pieces

Plastic TypePVC

MOQ1 Piece/Pieces

Product Type3001 SBR LATEX

Main MaterialMr. engineer 3001 SBR latex is based on modified styrene sutadiene latex sullied as ready to use bonding agent in liquid consistency.it is used for repair of spalled concretefloorscolumnsbeams.chajjasslabs and water proofing of toilet and new concrete and plasters

MOQ300 Bag/Bags

MgO %50%

Weight20 Kilograms (kg)

SO3 %98 %

Compressive Strength20 Megapascals (MPa )

Initial Setting Time30 Minutes

ColorWhite