Wall Mounted Flow Meter

Wall Mounted Flow meter:

Flow Rate Range: A 0.1 to 40 ft/sec (A 0.03 to 12.2 m/sec)
Pipe Size: Any pipe ID from A " to 180" (12.7 mm to 4.5 m)
Accuracy: A 2% of reading or 0.05 ft/sec (0.015 m/sec). Requires solids or bubbles minimum size of 100 microns, minimum concentration 75 ppm.
Repeatability: A 0.1%,
Linearity A 0.5%
Display: White, backlit matrix - displays flow rate, relay states, 16-digit totalizer,
Calibration: built-in 5-key calibrator with English.
Power Input: 100-240VAC 50-60Hz (see Options), 5 Watts maximum (with standard features)
Output: Isolated 4-20mA (1000 ohm load max.)
Control Relays: Qty 2, rated 5 amp SPDT, programmable flow alarm and/or proportional pulse
Enclosure: watertight, dust tight NEMA4X (IP 66) polyester with a clear polycarbonate face
Electronics Operating Temperature: -10A to 140A F (-23A to 60A C)
Sensitivity: adjustable. Damping: adjustable
Electrical Surge Protection: Sensor, 4-20mA output and AC power input
Model SE4 single-head ultrasonic with 20 ft (6 m) shielded cable and stainless steel mounting
kit for pipes A " (12.7 mm) ID or larger. Designed to withstand accidental submersion to 10 psi.
Certified non-incendive for Class I Division 2, Groups A,B,C,D hazardous locations
Sensors: Intrinsic Safety Barriers for Sensor mounting in Class 1 Div.1 hazardous locations
Application:Recommended for: liquids containing suspended solids or bubbles minimum size of 100 microns, minimum co