Triboelectric Mag Roller Coating

Triboelectric Mag Roller Coating

• Solves all problems related to worn mag rollers and doctor blades for
  less that 50 cents a coating.
• First, it restores the original
  triboelectric charge level and makes the print nice and dark again,
  eliminating almost all the need to replace old mag rollers and most doctor
  blades.
• As an added bonus, it removes the banding from hardened toner
  resins that can't be removed even with isopropyl alcohol and all the
  related uneven print defects that banding causes.
• It also eliminates
  the mag roller voids defect for the entire cycle and the print defect
  voids cause.
• Triboelectric is an ether derivative of polyethyleneglycol
  that is the only coating available that will dissolve toner resin
  buildup, you will actually see a big black gob of toner resin on the
  cotton round.
• The mag roller purposely has a rough surface of hills
  and valleys that work to generate a triboelectric or frictional charge
  based solely on the roughness of the surface.
• From the very first cycle,
  the un-removable toner resin begins to fill in the valleys and that
  slowly decreases the frictional charge level and causes light and
  uneven printing.
• Triboelectric is the only, coating short
  of hydrochloric acid that will safely dissolve the print destroying
  buildup of toner resin.