Electromagnetic Flow Meter - Accuracy: 100 %

ELECTROMAGNETIC FLOWMETER

The D&C are flanged or insertion type

Electromagnetic flow meters used for pipe 1/2 to

above in wastewater, chemical, industrial water or

municipal application. MICROMAG has no moving

parts and has round headed self-cleaning type

electrodes designed to discourage fouling, magmeter

performs well and requires minimum maintenance in

applications where debris or sand would impede

propeller meters. There is no rotor to stop turning or

bearings to wear out. Minimal straight pipe

requirements allow MICROMAG meters to be used in

piping configurations where there is little space

between the meter and an elbow. Flow rate and total

indications are standard on all models. Flow

measurement units are customer-selected and factory

set and can only be changed in the field by an

authorized D&C TECHNOLOGIES.

ELECTROMAGNETIC FLOWMETER

The D&C are flanged or insertion type

Electromagnetic flow meters used for pipe 1/2 to

above in wastewater, chemical, industrial water or

municipal application. MICROMAG has no moving

parts and has round headed self-cleaning type

electrodes designed to discourage fouling, magmeter

performs well and requires minimum maintenance in

applications where debris or sand would impede

propeller meters. There is no rotor to stop turning or

bearings to wear out. Minimal straight pipe

requirements allow MICROMAG meters to be used in

piping configurations where there is little space

between the meter and an elbow. Flow rate and total

indications are standard on all models. Flow

measurement units are customer-selected and factory

set and can only be changed in the field by an

authorized D&C TECHNOLOGIES.

INSTALLATION AND GROUNDING

POSITIONING THE METER

These meters can be installed horizontally, vertically and radial position.

STRAIGHT PIPE RECOMMENDATION

As with most flow meters, the MICROMAG requires some straight pipe before and/or after the meter

for best accuracy. However, the ability of electromagnetic meters to average the flow across the entire pipe

allows forshorter straight pipe recommendations than most mechanical meters.

Brand :DC TECHNOLOGIES

Material : SS & MS

Finish : Chrome

Driven Type : Electric

Shape : Rectangular

Color : Gray & Blue