Green+silver Revolvo Split Roller Bearings (Srbs)

Condition : New
Usage/application : Industrial
Is It Customized : Non-Customised
Lubrication : Standard
Bearing Type : Split Bearing
No. of Row : Standard

From long time in this domain, we are offering a wide array of Revolvo Split Roller Bearings (SRBs)SRBs in this domain. We are the exporter, importer and supplier of these product in Chandigarh, India. These are highly tested in various level to ensured the quality of this product. We are offering these product at good cost.

Revolvo Split Roller Bearings (SRBs) Fully split to the shaft Housed Cylindrical Roller Bearings with brass cages, perfect for trapped applications, where surrounding equipment would have to be removed (couplings, motors, gearboxes etc.) to fit a normal bearing.

Bearing range comparison
Revolvo Split Roller Bearings offer a range of bearing series, providing solutions for a wide range of operating conditions. 01 Light, 02 Medium and 03 Heavy Series accommodate increasingly higher static and dynamic loads.

03 Heavy Series Split Roller Bearing
A more specialised heavy duty series used in the most heavily loaded applications, generally operating at relatively low speed.

02 Medium Series Split Roller Bearing
An increased section on the 01 Light Series offers additional load-carrying capacity. This series is typically used in arduous, heavily loaded applications where shock loads and vibration may be present.

01 Light Series Split Roller Bearing
The most commonly supplied series, offering a good combination of load and speed capabilities, with the smallest cross section within the range.

Split Roller Bearing Types Retained Type Bearing (BR)
This bearing has integral lips on the outer race, to provide a surface for axial load. The axial load is accommodated on the inner race via the hardened clamp rings, which both align the inner race halves and provide roller guidance. In larger bearings the inner race is manufactured with integral ribs for roller guidance and axial load.

This type of bearing will locate the shaft axially as well as providing a means for taking axial load. The retained outer race must be locaIndustrial split bearings
ted sideways against one of the housing's grooved shoulders, using the pins and screws provided. Only one retained unit should be mounted on any particular shaft. Additional care should be taken when mounting split roller bearing units on shafts using other, non-split types of bearings (ball, cylindrical, spherical or taper roller etc.) to ensure there are no other locating bearings used.

Expansion Type Bearing (BX)
This bearing is designed for radial loads only. As in the retained type bearing, the rollers are guided on the inner race by the hardened shoulders of the clamping rings.

During expansion or contraction of the shaft rollers are free to move across the plain outer race, offering virtually no resistance to axial movement. Limits for the amount of axial movement are given in the assembly and maintenance section.

PLUMMER BLOCK HOUSINGS
The compact Split Plummer Block Bearing from Revolvo is the first split cylindrical roller bearing assembly to be interchangeable with standard SNL/SN/SD/SAF series Plummer Blocks - bringing the benefits of a split design to a much wider audience.

Complete range of SRB Plummer Block Housing

Cast iron Plummer Blocks accommodating adaptor sleeve-mounted solid spherical roller bearings are amongst the most common types in use, supporting rotating shafts in everything from conveyors and fans to line shafts. Yet their replacement is often time-consuming and difficult, due to the need to remove adjacent equipment.

Replacing a typical bearing mounted in a cast iron Plummer Block may take anything from hours to several days. In contrast, it may take as few as 1-2 hours to replace an Revolvo split bearing unit.