Phpa Polymer - Off-white Powder, 89% Solid Content, 15-45% Anionic Charge, 5-20m Molecular Weight | Shale Stabilization, Viscosifier, Fluid Loss Control, Friction Reduction, Lubrication

Our firm is successfully ranked amongst the top provider of premium quality PHPA Polymer. PHPA Polymer is high molecular weight polymer with a moderate anionic charge for drilling mud additive. It is can be used in both industrial and oil field drilling application and it is usable in both fresh water and brines. It can be used in high temperature. Application a Shale stabilization a Viscosifier a Friction reduction a Fluid loss control a Lubrication Specifications Appearance: off white powder Degree of charge, %: 15 - 45 Molecular weight, million: 5 - 20 Solid content, %: 89 min Polymer Mixing To obtain homogeneous solution, efficient dispersion is necessary. The most convenient method of dispersing these products is with a polymer eductor or a commercially available dry powder feeder unit. Solution should be made up at 0.1-0.3% solid. Make-up water temperature should be between 10a and 40a for optimum product performance. Following dispersion into agitated water, stirring should continue for about an hour to ensure complete dissolution. Stirring maybe carried out by propeller type stirrer with a speed of 200-500 rpm. It is recommended to have both a stock make-up tank and a solution holding tank for dosage into the system. The above recommended anionic solution concentration are stable for up to one week. Aluminum, zinc, copper, or iron should be avoided in make-up system.