Nuts And Bolts - High-strength Steel 10mm Diameter Unthreaded Grip Length | Superior Axial Clamping Force Enhanced Shear Resistance

Our organization is involved in manufacturing exporting and supplying Nuts and Bolts to our clients in Kolkata West Bengal India.

Bolts are often used to make a bolted joint. This is a combination of the nut applying an axial clamping force and also the shank of the bolt acting as a dowel pinning the joint against sideways shear forces. For this reason many bolts have a plain unthreaded shank (called the grip length) as this makes for a better stronger dowel. The presence of the unthreaded shank has often been given as characteristic of bolts vs. screws [3] but this is incidental to its use rather than defining. The grip length should be chosen carefully to be around the same length as the thickness of the materials and any washers bolted together.[4] Too short places the dowel shear load onto the threads which may cause fretting wear on the hole. Too long prevents the nut from being tightened down correctly. No more than two turns of the thread should be within the hole.[4]

Where a fastener forms its own thread in the component being fastened it is called a screw.[2] This is most obviously so when the thread is tapered (i.e. traditional wood screws) precluding the use of a nut[2] or when a sheet metal screw or other thread-forming screw is used.