Fevimate Xl

High performance Tile Fixing Adhesive for internal wall/ floor &external Flooring & Tile-on-Tile Applications.

Dr.
Fixit Fevimate XL is a blended polymer modified cement based powder
tile adhesive. It gives excellent bond on cementitious surfaces
like,concrete, plaster, etc.Dr. Fixit Fevimate XL forms a waterproof
barrier between two surfaces and has excellent `grab` properties.

Area Of Application

• For fixing all types of tiles on internal wall / floor, external
  floor & tile on tile applications. As well as swimming pool tiling
  applications.

• Ready to use, needs only mixing with water.
  
• Excellent adhesion, low shrinkage.
  
• Suitable for indoor and tile on tile applications.
  
• Sufficiently flexible to accommodate physical & thermal movements.
  
• Needs no curing, needs no hacking or mechanical key on the surfaces.
  
• Floors can be used after 24 hours.
  
• Curing not required.
  
• Soaking of tiles & backing of surface not required.

• The surface to be tiled should be clean and sound. Old surfaces must be free from wax, grease, polish, etc.
  
• Add 3 parts of powder to 1 part of water.
  
• Mix with a trowel or slow speed drills (50 - 100 rpm) until a lump free homogeneous paste is obtained.
  
• Spread the adhesive to a thickness of approx. 3-6 mm and comb with a notched trowel.
  
• Strictly apply the adhesive paste which can be tiled with in 10 to 15 mins.
  
• Intermittently touch the adhesive paste on substrate by
  finger. If the adhesive sticks to fingers then continue tiling and if
  not scrape off the adhesive and apply new coat.
• Start placing the tiles on the surface to be tiled. Tap the
  tiles properly to ensure complete coverage of the backside of tiles and
  to eliminate the possibility of any air voids.
• Keep joints between two-tiles using spacers.
  
• Allow tiling to set for 24 hours and start filling joints next day with Dr.Fixit Fevimate TG.

• Always add powder to water and not water to powder.
  
• Do not add more water than recommended.
  
• Do not add sand or cement at site.
  
• Before doing tile-on-tile application, ensure that the original tiling surface is in sound condition.
  
• In case of undulations in the existing floor, rectify the same before applying Dr. Fixit Fevimate XL.
  
• Do not use for vertical cladding of heavy tiles.
  
• Strictly not recommended for the direct use on gypsum plaster, paint, wood & metal.

Packing
• 5 kg, 20 kg, 25 kg, 30 & 50 kg.