Weldor Light Duty Hydraulic Shearing Machine - 5000mm Cutting Width, Mild Steel Frame | Fixed Rake Angle, Plc Control, Hydraulic Hold Down System

Hydraulic Shearing Machine Fixed Rake Angle

WELDOR Light Duty Hydraulic Guillotine Shearing Machine with a fixed rake angle is designed to suit sheet metal industries using thin sheets.

Frame
The rigid steel frame of WELDOR shears is optimally designed to avoid weak sections at load support and features an interlocked design.
The table of the frame is welded together with support of steel plates.
The table top surface is machined with a provision of T-slot to facilitate a front gauge stopper.
The ram assembly is welded with steel plate support.
Roller Guides
The upper beam is guided by three paint roller guides.
A replaceable hardened liner is provided for minimum wear, eliminating the need for lubrication of guides.
Hydraulic Power Pack
The hydraulic system is mounted at the top rear side of the machine.
Hydraulic components are of internationally reputed brands like Vickers, Dowty, Rexroth, etc.
Valves are mounted on a compact manifold block, minimizing piping and chances of leakages.
A sufficiently sized oil reservoir is provided for oil cooling.
Cylinders
Cylinders are precisely honed and fitted with hard chromed piston rods with high-quality sealing elements.
Cylinders are connected with the upper beam (cutting beam).
Hydraulic Hold Down
Hydraulic hold-down pads hold the sheet securely to avoid slipping and bowing, resulting in clean square cuts.
Hold-down units are provided for better clamping while cutting narrow strips.
Stroke
Stroke adjustment is facilitated with the help of a stroke setting rod and limit switches.
Blade Clearance
Blade clearance can be adjusted manually by a lever on each side of the machine, with calibration of clearance suitable for thickness.
Back Gauge
Hand-operated back gauges are provided.
Blades
WELDOR shears are equipped with high-quality, single-segment (HcHer) blades for longer tool life.
The blades are four-edged and easy to assemble, reducing downtime.
Operation
The machine can be operated by push button or by foot switch.
When the foot switch is pressed, hold-down plungers come down, and the upper beam starts the shearing operation.
If the foot switch is released at any point of shearing, the upper beam will return back from that point.
Finger Guard
A finger guard is fitted in front of the hold-down for operator's protection without obstructing the view.
Standard Accessories
Electric control panel with push buttons
Electric motor
Foot switch
Blade clearance arrangement
Manual back gauge
T-slot front supporters
Front scale gauge
Stroke adjustment rod with limit switch
Blades (HcHer)
Hydraulic hold-down system
Instruction and maintenance manual
Optional Accessories
Motorized back gauge with DRO (Digital Readout)
Electronic stroke counter
NC rear sheet supporter
Foundation bolts
Back gauge ball transfers
Extension squaring arm
Automatic lubrication system