Black Arc Plasma Welding Machine

We are one the leading manufacturer exporter and supplier a myriad collection of ARC Plasma Welding Machine in Mumbai Maharashtra India. One can avail this range of product from us at most reasonable prices.

Product Details:-
Up Slope Timing 0 To 10 sec (In steps of 0.1 secs.)
Hot Start : 0 To 100% (In steps of 0.1%)
Base Current : 0 To 600 Amps (In steps of 0.01 Amps)
Pulse on Time : 0 To 100% (In steps of 0.1%)
Bus Terminals : Modular fieldbus system (Beckhoff Germany)
Remote Console : Color display with touch screen control
Post Flow : 0 To 30 sec (In steps of 0.1 secs.)
Main Arc Open Circuit Voltage : 90 Volts DC
Pre Flow : 0 To 10 sec (In steps of 0.1 secs.)
Pulse Frequency Type : Square wave / Sin wave / Triangular wave (with start & stop delay)
Communication : ETHER CAT (Beckhoff Germany)
Class of Insulation : H class
Input Supply : 415 Volts 3 Phase 50Hz
Pilot Arc Current Range : 5 Amps. DC to 20 Amps. DC
Pilot Arc Current Control : In steps of 0.01 Amps. (digital control)
Soft Start : 0 To 100% (In steps of 0.1%)
Pulse Frequency : 0 To 1000 Hz (In steps of 0.1 Hz)
Mode : Manual (2T/4T) / Semi auto / Fully auto / Direct mode / Test mode
Pilot Gas : Argon (25 PSI at 0.5 - 5 Ltrs/min)
Down Slope Ttiming : 0 To 10 sec (In steps of 0.1 secs.)
CPU : Modular Din rail type (Beckhoff Germany)
Duty Cycle : 70%
Protection : IP - 21
Cooling : Forced Air Cooled
Operating Supply Voltage Range : 370 Volts AC to 460 V AC
Input Power : 22 kVA at full load

Special Machine Features:-
IGBT based inverter power supply saves precious power.
Advanced inverter design system delivers continuously adjustable constant current output.
Gives you stable arc at as low as 0.5 Amps.
High open circuit voltage ( ) for good arc striking and for good quality welding.
Electronic pilot arc system ensures soft start and reliable arc striking.
No load power consumption is very low (<0.1 V ).
Stepless setting for pilot arc & main arc current.
Local or remote arc current setting.
Actual welding current & pilot arc current can be seen on front panel digital display.
High temp protection with indication.
Under voltage / over voltage / over current protection.
Single phasing protection. ( For 3 phase systems.)
Low gas & low water pressure protection.
Logic fail protection (ensures IGBT safety).
High efficiency more than 90 %.
AAT & 2T/4T mode.
Equipped with gas pre flow/post flow up slope/down slope peak & background current adjustment pulse frequency pulse on time setting.
Cnc/Robotic machine interface option for automated control.
Easy to use.