Electric Power Tools In Jiangyin

Price: 65 USD ($) (Approx.)/Piece

MOQ - 1 Piece/Pieces

MOQ - 1 Piece/Pieces

Product Type - Electric Screwdriver

MOQ - 1 Piece/Pieces

MOQ - 50 Piece/Pieces

Product Type - Battery Crimping Tool 16-300mm2 Micro computer control system-automatically detects the pressure when in crimping with double safety protect. The tool is equipped with a double piston pump which characterized with a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping. If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes. One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position. A Temperature sensor makes the tool stop working automatically when the temperature over 60a,,f under long time working, the fault signal sounds, it means the tool canaEURtmt continue work until the temperature reduced to the normal. Head rotates 360Adeg OLED Display (Crimp Times, Pressure, Voltage) LED Light Emergency Pressure Release Button All tools can be controlled by one trigger Ergonomic design for one hand operation. Micro computer control system-automatically detect the pressure Li-ion lower power weight ratio with 50% more capacity and shorter charging cycles Technical Data Model TYNEC-300 TYNEC-300C TYNEC-400 TYNEC-400U Crimping force 60KN 120KN 130KN 130KN Crimping range 16-300mm2 16-300mm2 16-400mm2 16-400mm2 Stroke 17mm 32mm 42mm 20mm Crimp/charge 320times (Cu150mm2) 320times (Cu150mm2) 120times (Cu150mm2) 120times (Cu150mm2) Crimping cycle 3-6s (depend on the size of cable) 3-6s (depend on the size of cable) 10-20s (depend on the size of cable) 10-20s (depend on the size of cable) Voltage 18V 18V 18V 18V Capacity 3.0Ah 3.0Ah 3.0Ah 3.0Ah Charging time 45minutes 45minutes 45minutes 45minutes Package Plastic case Plastic case Plastic case Plastic case Crimping die 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm2 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm2 Battery 2pcs 2pcs 2pcs 2pcs Charger 1pc (AC110-240V,50-60Hz) 1pc (AC110-240V,50-60Hz) 1pc (AC110-240V,50-60Hz) 1pc (AC110-240V,50-60Hz) Sealing ring of cylinder 1set 1set 1set 1set Sealing ring of safety valve 1set 1set 1set 1set General features: The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion. The crimping head can be smoothly turned by 360Adeg around the longitudinal axis in order to gain better access to tight corners and other difficult working areas. Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries. A Temperature sensor makes the tool stop working automatically when the temperature over 60a,,f under long time working, the fault signal sounds, it means the tool canaEURtmt continue work until the temperature reduced to the normal.

Capacity - 3 m3/hr

Voltage - 18 Volt (v)

Price Trend: 200-1000 USD ($) (Approx.)/Piece

MOQ - 10 Piece/Pieces

Product Type - Electric

Material - Electric horizontal arm

Application - Rotationg

MOQ - 500 Piece/Pieces

Product Type - Mini Drill

Application - Building and Industrial

Frequency (MHz) - 50/60 Hertz (HZ)

MOQ - 1 Set/Sets

Product Type - Power tool

Application - Assembly screw,screw drive

Frequency (MHz) - 50/60 Hertz (HZ)

MOQ - 1000 Piece/Pieces,

Product Type - Brushless Tools

Material - ABS

Application - Industrial