जलरोधक यौगिक

4

3

Construction industry

Consumption Layer Product Consumption Base coat SikaTop -109 Seal IN ~1 kg/m2 Top coat SikaTop -109 Seal IN ~1.2 kg/m2 Note: The consumption will vary depending on application area, substrate type, substrate roughness, surface profile, absorption of the surface and thickness required. Ambient air temperature +10 C min. / +40 C max. Mixing ratio Part A : Part B = 1 : 1.5 (by weight) Substrate temperature +10 C min. / +40 C max. Pot life ~40 minutes (100 g mass, +27 C)

Terraces

The concrete substrate must be sound and with a minimum pull off strength of 1.5 N/mm2. The substrate must be free of all traces of contaminants, loose and friable particles, cement laitance, oils and grease, wax, curing compounds, water repellent coatings etc. The substrate must be prepared by suitable mechanical preparation techniques such as high pressure water jetting, needle guns, grinding, blast cleaning etc. High spots must be removed by grinding. Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed. Repairs to the substrate, filling of blowholes/voids and surface levelling must be carried out using appropriate products from the Sikafloor , Sikadur and Sikagard range of materials. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum. Any wax based curing compounds or water repellent coatings must be fully removed by scraping or grinding. All intersections of horizontal and vertical surfaces should be profiled with a mor tar fillet of minimum 25 mm 25 mm

SBR Latex Waterproofing Compound

BAG

Plastic Bucket

50 Kg Pack

हमारी नमूना नीति के बारे में जानकारी के लिए हमसे संपर्क करें