Earthing Kit

MOQ100 Unit/Units

ColorCopper

Product TypeCopper Solar Earthing Kit

ApplicationIndustrial

MOQ1 Set/Sets,

Surface FinishCopper Bonded / Hot-Dip Galvanized

PropertiesThis set contains the GI Earthing Electrode, Back fill Compound along with an Earth pit cover. The GI earthing electrode is made of galvanized iron and available with a length of 2 meters and 3 meters along with a dia, which can be 40mm, 50 mm, 60 mm, 80 mm and 90 mm. Up to 100 microns of zinc coating makes this product last long, for almost 7 - 10 years. Back fill compound offers a resistivity of only 0.24 ohm-m. This white powdered compound is made of several conductive components. It allows the leakage current to flow without any hindrance. The anti-corrosive property of this earth enhancing compound also protects the GI earthing electrode from corrosion. Back fill compound offers a resistivity of only 0.24 ohm-m. This white powdered compound is made of several conductive components. It allows the leakage current to flow without any hindrance. The anti-corrosive property of this earth-enhancing compound also protects the GI earthing electrode from corrosion. Back fill compound offers a resistivity of only 0.24 ohm-m. This white powdered compound is made of several conductive components. It allows the leakage current to flow without any hindrance. The anti-corrosive property of this earth enhancing compound also protects the GI earthing electrode from corrosion. Back fill compound offers a resistivity of only 0.24 ohm-m. This white powdered compound is made of several conductive components. It allows the leakage current to flow without any hindrance. The anti-corrosive property of this earth enhancing compound also protects the GI earthing electrode from corrosion. Back fill compound offers a resistivity of only 0.24 ohm-m. This white powdered compound is made of several conductive components. It allows the leakage current to flow without any hindrance. The anti-corrosive property of this earth enhancing compound also protects the GI earthing electrode from corrosion. Back fill compound offers a resistivity of only 0.24 ohm-m. This white powdered compound is made of several conductive components. It allows the leakage current to flow without any hindrance. The anti-corrosive property of this earth enhancing compound also protects the GI earthing electrode from corrosion. The Electrogrip earth pit cover is made of polypropylene, which has a high melting point. This durable earth pit cover lasts long and has a load-bearing capacity of up to 8 ton. It properly covers and protects the connections and outer portion of the electrode.

Humidity %0aEUR"95% (non-condensing)

Product TypeEarthing and Grounding System

ApplicationElectrical safety, grounding of equipment, lightning protection

Frequency (MHz)50aEUR"60 Hertz (HZ)

MOQ1 Unit/Units

Display TypeDigital

Power SupplyBattery

Frequency50-60 Hertz (HZ)

FeaturesDurable

MaterialABS plastic

Operate MethodAutomatic

MOQ100 Set/Sets

FeatureCorrosion resistant

ColorCopper

SizeStandard

Installation GuidelineReady to install

Product TypeEarthing Kit

MaterialCopper

MOQ50 Piece/Pieces, Piece/Pieces, Piece/Pieces

Colorcu

Life Span20

Diameter17 Millimeter (mm)

Copper Thickness.2 Millimeter (mm)

Product TypeSolar Earthing Kit

MaterialCopper Clad Steel

MOQ1 Millimeter/Millimeters

UsageANY

SizeANY

MaterialSS

Power SupplyNA

HeightANY Millimeter (mm)

Power ConsumptionNA Watt (W)

MOQ1 Set/Sets

ColorBrown

Product TypeCOPPER COATING

MaterialOther

Operating Temperature-10 to +80 Celsius (oC)

Max Voltage100-240 Volt (V)

Max System Voltage20 Ampere (A)

MOQ25 Unit/Units

FeatureCorrosion Resistant, Weatherproof

IP RatingIP55

Mounting TypeClamp Mounted

ShapeRound

Humidity %Up to 95% RH

Operating Temperature-10C to +50C

MOQ50 Piece/Pieces

Connector TypeBolt & Nut Connection,Clamp Type Connector

ColorBolt & Clamp Connection AND Mechanical Clamping System

IP RatingN/A Outdoor underground earthing system component

Mounting TypeVertical Ground Mounted Installation Direct Burial / Earth Pitting Mounting

Shapestar/crown-shaped

FeatureMulti-spike lightning interception, corrosion-resistant copper-bonded electrode, low-resistance grounding, suitable for lightning protection and electrical safety systems.

MOQ10 Piece/Pieces

Display FunctionText

Tube Chip ColorWhite

Protection LevelIP55

Input Voltage110-120 Volt (V)

SizeCustomized

MOQ100 Set/Sets

Life Span> 10 years

Tensile Strength600 N/mmA2

Copper Thickness250 microns (Approx)

Diameter17mm (Typical)

PurityCopper bonding 99.9%

StrengthHigh Mechanical Strength

MOQ100000 Meter

ColorSilver

Power RatingIP65

Product TypeEarthing Pipe

MaterialGalvanized Steel

ApplicationIndustrial

ShapeRound