The bright bar is a carbon steel alloy made from stainless steel alloys through a cold drawing technique in a cold reduction mill. Bright bars are also manufactured by peeled and turned processes. The stainless steel is then annealed, turned, ground, polished and temper rolled to smoothness making it shine thereby named bright bars. Bright bars possess a high degree of concentricity, straightness and due to their corrosion-resistant, welding ability, and machinability properties bright bars are raw materials for bolts, nuts, shafts, fasteners, tools, decorative indoor fabrication, sports, and health equipment, fixtures, hoses, conveyor shafts, and manual irrigation equipment. It is also widely used by automobile, fabrication, engineering, fan, chemical, food, marine, dairy, pharmaceuticals, petroleum, and aerospace industries. The manufacturing of bright bars involves three steps: Rolling raw materials, drawing process, and finishing. They are manufactured in round, square and hexagonal shapes and grades 201, 202, 304, 309, 316, 316L, 316Ti, 321, and the 400 series. Enlisting ten of the top manufacturers, suppliers, and exporters of bright bars in India are:
- Jindal Steel and Power (JSPL)
- Beekay Steel Industries Limited
- Kamdhenu Steel
- Shah Alloys
- India Steel Works Limited
- Mukand Ltd.
- Aditya Ispat Limited
- Grand Foundry Ltd.
- Ambica Steels Ltd.
- Mettler Steels Pvt. Ltd.
List of Top 10 Indian Manufacturers, Suppliers, and Exporters of Bright Bars
The list of the top ten Indian manufacturers, suppliers, and exporters of bright bars is given and a brief introduction about each one of them is discussed in the section below:
1. Jindal Steel and Power (JSPL)
Jindal Steel and Power (JSPL) is a private Indian steel and power company that is based in New Delhi. JSPL was incorporated as a part of the OP Jindal Group conglomerate in 1979. Being the best bright bars dealers, its domestic and overseas subsidiaries are located in Gujarat, Bolivia, Mauritius, South Africa, Mozambique, Botswana, Madagascar, Tanzania, Zambia, and Namibia. In terms of production quantity, it is the third-largest steel producer in India while also leading in power, mining, oil and gas, and infrastructure sectors. Along with manufacturing, the company also sells sponge iron, bright steel bars, mild steel slabs, iron ore, mild steel, structural steel, ferrochrome, hot rolled plates and coils, and a coal-based sponge iron plant. The company's net sales in Financial Year 2021 (FY21) are Rs. 33307.83 crores.
2. Beekay Steel Industries Limited
Beekay Steel Industries Limited (BSIL) is a private Indian steel company that has been manufacturing, supplying, and exporting steel products for over 50 years. It is based in Kolkatta, West Bengal. At present, production plants are located in West Bengal, Jharkhand, Andhra Pradesh, and Tamil Nadu. The variety of processes employed by the company to build specified steel quality includes Hot Rolling, Cold Drawing, Thermo-Mechanical Treatment (TMT), Peeling & Grinding, and Machining. Its production material ranges with sections, bright bars, structural bars, TMT bars, crane rails, and coil springs of a variety of specifications and grades. The company's net sales in FY21 is Rs. 874.31.
3. Kamdhenu Steel
Kamdhenu Steel is a part of the Kamdhenu Group companies that have been in steel production and marketing since 1995. They are one of the best bright bars manufacturers where the variety of processes are employed by the company to build specified steel quality of double TMT bars, TMT rebars, structural steel, Prepainted galvanized roof sheets, Galvalume sheets, pre-engineered building parts, decorative paints, MS Pipes & Tubes, Wirebond, and Bright bars. Kamdhenu Steel has its office in Gurgaon, Haryana, and is backed by a committed chain of 7500 dealers and distributors located across the country. There are more than 50 manufacturing units of its brands' products leading to more than Rs. 625.22 crores net sales in FY21.
4. Shah Alloys
Shah Alloys has been in stainless steel, alloy, and special steel, carbon/ mild steel, and armor steel in flat and long products manufacturing and marketing since 1990. Shah Alloy's office is located in Gandhinagar, Gujarat which is one of the best bright bars suppliers. It is one of the many key suppliers to many renowned companies domestically and overseas, reach to more than 50 countries around the world. The variety of quality steel manufactured are hot rolled coils, hot-rolled sheets, cold-rolled coils, cold-rolled sheets, hot rolled round bars, flat bars, angles, and bright bars. Steel grade and specified types manufactured are chrome-molybdenum steel, wear-resistant steel, tempered steel, corrosion steel, tool steel, pressure vessel steel, and high tensile steel. Their integrated manufacturing facilities loaded to capacity leading to more than Rs. 501.92 crores net sales in FY21.
5. India Steel Works Limited
Indian Steel Works Limited was founded in 1954 by Mr. Harbanslal Gupta with bright bar-making facilities and later expanded to bar and rod melting, rolling and heat treatment, and wire drawing. Two fully integrated production facilities are located in Khopoli, Maharashtra. The annual capacity of bright bars production is 30000 metric tonnes. The company’s net sales in FY21 were Rs. 143.86 crores making them the one of the best bright bars exporters.
6. Mukand Ltd.
Being the ultimate bright bars suppliers, it was established in pre-independence, in 1937, Mukand Iron & Steel Works Limited, a part of the Bajaj Group of companies then operated re-rolling in Lahore and a foundry in Bombay. The company later rebranded to Mukand Ltd. in 1989 and ever since has manufactured over 400 grades of specially engineered steel in the forms of bars, bright bars, wire rods, and wires. Manufactured stainless steel products are exported to The United States of America, Germany, Italy, the Netherlands, Switzerland, United Arab Emirates, Japan, Korea, Hong Kong, Taiwan, Vietnam, and a few others. The total income of the company in FY21 is Rs. 1348.41 crores.
7. Aditya Ispat Limited
Aditya Ispat Limited was a private company incorporated in 1990 and converted to a public limited company in 1992. Its registered office is located in Andhra Pradesh. The company can manufacture 5000 TPA of HB wire, annealed wire, and binding wire and 5000 TPA of bright steel bars of mild steel, carbon steel, and alloy steels. The company's net sales are Rs 49.71 crores during FY21.
Also, Read: 2023 Top 10 Biggest Quality Round Bars Manufacturers, Suppliers & Exporters in India
8. Grand Foundry Ltd.
Grand Foundry Ltd. was incorporated as a private company in 1973 and its registered office is located in Mumbai, Maharashtra. The company is presently engaged in manufacturing bright bars, also known as cold-finished steel bars. They are one of the best bright bars suppliers where the plant is located in New Bombay and has an annual production capacity of 9500 metric tonnes. The company commits to manufacturing, repairs, process, importing, exports, and deals with engineering equipment parts and machine tools, and their accessories. Net sales of the company in December 2020 were at Rs. 1.07 crores.
9. Ambica Steels Ltd.
Ambica Steel Ltd. started its operations with a 5 metric tonnes arc furnace in the year 1970. The headquarter is located in New Delhi. They are one of the best bright bars exporters. Having a capacity of 10000 metric tonnes of alloy steel annual production, now the company has a fully integrated plant equipped with all stainless steel manufacturing facilities. These facilities can facilitate the production of about 80000 tonnes per annum of bright bars, precision bars, cold drawn bars, harp bars, hot rolled steel bars in flat and long forms, billets, and ingots. Stainless steel types that are manufactured are austenitic, martensitic, ferritic, and duplex grades. Ambica Steels Limited reported a gross turnover of over INR 500 crores.
10. Mettler Steels Pvt. Ltd.
Mettler Steels Pvt. Ltd. was established in 2000 and its office is located in Mumbai, Maharashtra. Its daily production capacity is 80 tonnes and up to 30000 tonnes per annum. The company manufactures TMT bars, cold-treated bars, and bright bars. Its main market is overseas with export revenue of US$10 Million - US$50 Million. Their export quantity exceeds more than 90% of their production quantity for which they prove to be the best Bright Bars dealers.
Bright bars are carbon alloy steels that possess high-quality strength, durability, precision, and a smooth finished surface. Because of their high-quality properties, they are commonly used in precision tool making. These bars are produced in two ways; cold drawing, and peeled and turned process, which is then followed by surface finishing processes. You need to make sure of choosing the perfect bright bars manufacturers for your requirement. Bright steel bars come in three shapes; round, square, and hexagonal, and numerable grades. The companies mentioned above can provide the best and most good performance bright bars in India as well as other parts of the world.
FAQs: Bright Bars
Q. What is the difference between bright bars and black bars?
Ans: Black bars are made by rolling process by passing the steel through several rolls at a temperature of around 1200 Centigrade. The steel is pressed into different shapes while they don’t involve second heating for surface finishing. While bright bars are advanced processed versions of black bars formed by the drawing process in cold reduction mills and later grind, polish, and temper rolling to precision.
Q. What are the properties of bright bars?
Ans: The prominent qualities of a bright bar compared to other stainless steel products are its strength, durability, and corrosion resistance. They are favorable for making precision machining parts because of their excellent welding ability and machinability.
Q. What is the Indian standard that caters to bright steel bars' quality production?
Ans: The Bureau of Indian Standards, New Delhi has published a standard, IS 9005 for catering to quality manufacturing and quality check of bright steel bars produced or purchased in India.
Explore More :