Xhca Hydraulic Motor

These XHCA Hydraulic Motor is radial plunger type with stationary housing while the cylinder body/hollow shaft rotate. The cylinder body is installed on the roller bearing of the housing. Some even number of plungers is evenly distributed in the radial cylinder hole of the cylinder body. The port plate can precisely distribute oil to the working plunger; every plunger functions on the cam roller. When hydraulic force functions on the plunger, the cam roller will transmit the force to the incline of the cam ring while the cam ring is fastened to gather with the housing, so torque is generated. The cam roller will transmit the counter force to the plunger in the cylinder body. so rotation occurs. Meanwhile, the torque is proportional to the system pressure. The main oil pipe of the system is connected to the oil inlets A and C on the inter face body, while the oil drain tube is connected with oil outlets D1,D2 or D3 on the oil outlet housing. Motor is connected with the main shaft of the equipment through the hollow shaft in the cylinder body. The locking plate or spline connection is used to transmit torque. The symmetric design of XHCA Hydraulic Motor makes it become a double-placement motor. That's to say, the motor can operate at two different speeds for specific flow. Install a special valve to the oil inlet flange of interface body and the displacement can be changed.