Removable Turbine Cover"low Heat Loss,low Noise"

COMPLIANCE ASTM STANDARD HITLIN E Glass Fiber Preformed Pipe Sections General Product Information:   Description & Common Applications: HITLIN Industrial Insulation is a high density E-Glass product combining a patented manufacturing process using specially processed needled mat and inorganic binders resulting in non-combustible high temperature insulation with superior thermal performance and excellent fire resistant properties. Two-piece pipe cover is available in pipe sizes from 1/2 (15mm) to 44 (1,120mm) in diameter. Board material are available both in flat form or preformed to fit the exact curvature of any vessel, tank, duct or exchanger. All HITLIN material is available in single thicknesses up to 6 (150mm). HITLIN RCUI Type is a water repellent but vapor permeable insulation    These rigid mandrel-wound pipe sections are made from virtually unbreakable continuous e-glass fiber. HITLIN is ideal for steam and process pipe systems operating at temperatures to 1400F (760C), where energy conservation, personnel protection and fire control matter. HITLINRCUI is 99.7% water resistant making it ideal for applications where moisture is or could be present Compliance and Performance:   ASTM C 547 Standard Specification for Mineral Fiber Preformed Pipe Insulation Type I, II IV, V Complies ASTM C 165 Compressive Strength @ 5% Deformation 196 kPa ASTM C 302 Density Preformed Pipe Insulation 185 kg/m- 200 kg ASTM E 162 Surface Flammability Complies ASTM E 84 Surface Burning Characteristics Flame Spread = 0 Smoke Developed = 0 CAN/ULC S102 Surface Burning Characteristics Flame Spread = 0 Smoke Developed = Passed ASTM E136 Behavior of Materials at 750C Non-combustible CAN/ULC S114 Non-Combustibility of Insulation Non-combustible ASTM E 662 Smoke Generation (NFPA 258) Complies ASTM C 411 Hot Surface Performance In Compliance with ASTM C547 @ 760C ASTM C 447 Maximum Surface Performance In Compliance with ASTM C547 @ 760C ASTM C 795 *  Stainless Steel Stress Corrosion Specification as per Test Methods C871 and C692: U.S. Nuclear Regulatory Commission, Reg. Guide #1.36: U.S. Military Specifications MIL-I-24244 (all versions including B and C) Conforms ASTM C 356 Linear Shrinkage < 0.27% @ 650C ASTM C 1104 Moisture Sorption < 0.04% ASTM C 585 Inner & Outer Diameters for Nominal Pipe Sizes Complies  *When ordering material to comply with any ASTM, government, or other specification, a statement of that fact must appear on the purchase order. These specifications require specific lot testing and prohibit the certification of the lot after shipment has been made. There will be additional charges associated with compliance testing.