Medical Waste Incinerator Sci-inc-30/1

From the primary chamber under the hearth through an integral refractory brick system. This ensures maximum gas turbulence/ mixing is achieved thus aiding clean combusted gases. All gases then reside inside the after burner chamber for a minimum of 2 seconds at temperatures of 850-1150A C ensuring complete high temperature termination/oxidation of the gas combustion products.


Scientico Incinerators are CE certified

General Construction

* : Pre-fabricated 5MM robust mild steel casing, seam welded & suitably stiffened/ braced where necessary
* : High Quality Heat Resistant Paint is used.
* : Refractory lining in the primary & secondary chambers totalling thickness of 215mm,rated at 1260A A C, provide increased fuel efficiency.
* : Removable roof and back plate for ease of maintenance.
* : Air Blower for rapid cooling systems, aiding cleaner burns and faster cool down times.
Primary Chamber :
* Fully insulated internal refractory lining,
constructed from high grade refractory brick
ensuring a self-supporting interlocked
arrangement.
* One manually operated, access lid
* Two waste ignition burner, temperature
controlled on-o , complete with internal air fans
* A pre-cast block impact zone, that protects the
refractory lining when loading.


: Secondary Chamber
* Fully insulated internal refractory lining,
constructed from high grade low thermal
mass insulation.
* One secondary chamber burnout burner,
temperature controlled on-o , complete with
internal air fans
* Integrated combustion burner air fans with
automatically controlled distribution to their
designated area.
* One temperature sensor mounting point at the
top of the chamber ensuring the chamber
reaches the necessary 850A A A A C minimum.
Technical Spec. : SCI-INC-30/1

Burning Rate (kgs/Hour) : 50-60 kgs/Hr.

Feed Capacity (kgs) : 100-120 kgs

Equipment Weight : 2500 kgs

Primary Chamber (Liters) : 360

Secondary Chamber (Liters) : 200

External Dimensions (cm) : 145x90x175

Internal Dimensions (cm) : 100x60x60

Oil Tank(Liters) : 200

Door Opening (cm) : 48 x 60

Chimney (M) : 5.0

Secondary Chamber : YES

Combustion Fuel : Oil/Gas

Residency Time : 2.0 Sec.

Temperature Monitoring : YES

Constant Run Fan : YES

Operation Temperature : 950-1050

SCRUBBER :-

Type : Ventury Scrubber

MOC : SS316

Temperature at the outlet : >80A A A A C

Scrubbing Media : Caustic Soda

RE-CIRCULATION PUMP FOR VENTURI SCRUBBER : -
Type : Centrifugal
MOC : M.S
Piping : GI
DROPLET SEPARATOR & RE-CIRCULATION TANK (INTEGRAL) :
Type : Cyclonic
Application : To remove moisture
MOC : M.S FRP Lined/ epoxy Paint
I. D. FAN :
Type : Centrifugal
MOC : M.S
Drive : Direct
COMBUSTION FAN :
Type : Centrifugal
Modulation : Provided
MOC : M.S
Drive : Direct